• 简体中文
• English

MAX9266：HDCP Gigabit Multimedia Serial Link Deserializer with LVDS System Interface

HDCP GMSL Serial Link Deserializer with LVDS System Interface and Integrated Control Channel is Ideal for Digital Video Applications

The MAX9266 gigabit multimedia serial link (GMSL) deserializer features an LVDS system interface and high-bandwidth digital content protection (HDCP) decryption for content protection of DVD and Blu-ray™ video and audio data. The deserializer pairs with any HDCP-GMSL serializer to form a digital serial link for the transmission of control data and HDCP-encrypted video and audio data. GMSL is an interface approved by Digital Content Protection, LLC (DCP). The deserializer features 3-channel and 4-channel modes. The 3-channel mode outputs three lanes of LVDS data (21 bits), UART control signals, and three audio outputs. The 4-channel mode outputs four lanes of LVDS data (28 bits), UART control signals, three audio outputs, and auxiliary control signals. The three audio outputs are for I²S audio, supporting an 8kHz to 192kHz sampling frequency and a sample depth of 4 to 32 bits. The embedded control channel forms a full-duplex differential 9.6kbps to 1Mbps UART link between the serializer and the deserializer. An electronic control unit (ECU) or microcontroller (µC) can be located on the serializer side of the link (typical for video display), on the deserializer side of the link (typical for image sensing), or on both sides. The control channel enables ECU/µC control of peripherals on the remote side, providing such functions as backlight control, touch-screen input, and HDCP-related operations. The serial link signaling is AC-coupled current-mode logic (CML) with scrambled 8b/10b coding. For driving longer cables, GMSL serializers have programmable pre/deemphasis, and the deserializer has a programmable channel equalizer. For reduced EMI, the deserializer has programmable spread spectrum on the LVDS and control outputs. The serial link inputs and the LVDS output meet ISO 10605 and IEC 61000-4-2 ESD standards. The deserializer's core supply is 3.3V and the I/O supply is 1.8V to 3.3V. The device is available in a 48-pin TQFP package with an exposed pad and is specified over the -40°C to +105°C automotive temperature range.

Key Features HDCP Encryption Enable/Disable Programmable Through Control Channel Control Channel Handles All HDCP Protocol Transactions—Separate Control Bus Not Required HDCP Keys Preprogrammed in Secure On-Chip Nonvolatile Memory 2.5Gbps Payload Data Rate (3.125Gbps with Overhead) AC-Coupled Serial Link with Scrambled 8b/10b Line Coding 8.33MHz to 104MHz (3-Channel LVDS) or 6.25MHz to 78MHz (4-Channel LVDS) Pixel Clock 4-Bit to 32-Bit Word Length, 8kHz to 192kHz I²S Audio Channel Supports High-Definition Audio Embedded Half-/Full-Duplex Bidirectional Control Channel 9.6kbps to 1Mbps Base Mode and Bypass Mode Interrupt Supports Touch-Screen Displays Remote-End I²C Master for Peripherals Programmable Channel Equalizer for 15m Cable Drive at 3.125Gbps Programmable Spread Spectrum on Serial Outputs Reduces EMI Serial-Data Clock Recovery Eliminates External Reference Clock Auto Data-Rate Detection Allows On-The-Fly Data-Rate Change Built-In PRBS Checker for BER Testing of the Serial Link ISO 10605 and IEC 61000-4-2 ESD Tolerance

MAX9266: Typical Application Circuit Applications/Uses High-Resolution Automotive Navigation Rear-Seat Infotainment

DataSheet

Parametrics

Design kits & evaluation modules

• MAX9266EVKIT

Quality and Environmental Data

• MAX9266.pdf

Related Products

• MAX9265：HDCP Gigabit Multimedia Serial Link Serializer with LVDS System Interface
• MAX9263：HDCP Gigabit Multimedia Serial Link Serializer/Deserializer

Ordering Information