• 简体中文
• English

MAX9880A：Low-Power, High-Performance, Dual I²S, Stereo Audio Codec

Flexible Inputs and Outputs Simplify Design Complexity and Provide High Quality Audio for Portable Applications

The MAX9880A is a high-performance, stereo audio codec designed for portable consumer applications such as smartphones and tablets. Operating from a single 1.8V supply to ensure low-power consumption, the MAX9880A offers a variety of input and output configurations for design flexibility. The MAX9880A can be combined with an audio subsystem, such as the MAX9877 or MAX9879, for a complete audio solution for portable applications. The MAX9880A's stereo differential microphone inputs can support either analog or digital microphones. A stereo single-ended line input, with a configurable preamplifier, can either be recorded by the ADC or routed directly to the headphone or line output amplifiers. The stereo headphone amplifiers can be configured as differential, single ended, or capacitorless. The stereo line outputs have dedicated level adjustment. There are two digital audio interfaces. The primary interface is intended for voiceband applications, while the secondary interface can be used for high performance stereo audio data. Two digital input streams can be processed simultaneously and both digital interfaces support TDM and I²S data formats. The flexible clocking circuitry utilizes any available 10MHz to 60MHz system clock, eliminating the need for an external PLL and multiple crystal oscillators. Both the ADC and DAC can be operated synchronously or asynchronously in master or slave mode. The ADC can be operated from 8kHz to 48kHz sample rates, while the DAC can be operated up to 96kHz. The MAX9880A prevents click and pop during volume changes and during power-up and power-down. Audio quality is further enhanced with user-configurable digital filters for voice and audio data. Voiceband filters provide extra attenuation at the GSM packet frequency and greater than 70dB stopband attenuation at fS/2. An I²C or SPI™ serial interface provides control for volume levels, signal mixing, and general operating modes. The MAX9880A is available in space-saving, 48-bump, 2.7mm x 3.5mm, 0.4mm-pitch WLP and 48-pin, 6mm x 6mm TQFN packages.

Key Features 1.8V Single-Supply Operation 10.6mW Playback Power Consumption 8kHz to 96kHz Stereo DAC with 96dB Dynamic Range 8kHz to 48kHz Stereo ADC with 82dB Dynamic Range Support for Any Master Clock Between 10MHz to 60MHz Stereo Microphone Inputs Support Digital Microphones Stereo Headphone Amplifiers: Differential (30mW), Single-Ended, or Capacitorless (10mW) Stereo Line Inputs and Stereo Line Outputs Voiceband Filters with Stopband Attenuation Greater than 70dB Battery-Measurement Auxiliary ADC Comprehensive Headset Detection Dual I²S- and TDM-Compatible Digital Audio Interfaces I²C- or SPI-Compatible Control Bus with 3.6V Tolerant Inputs

MAX9880A: Simplified Block Diagram Applications/Uses Cellular Phones Portable Gaming Devices Portable Multimedia Players Tablet PCs

DataSheet

Parametrics

Design kits & evaluation modules

• MAX9880AEVKIT

Ordering Information