• 简体中文
• English

MAX9890：Audio Click-Pop Suppressor

Industry's First Integrated Audio Click-and-Pop Suppressor

The MAX9890 provides click-and-pop suppression for devices such as CODECs with integrated headphone amplifiers that lack a clickless/popless startup/power-up or shutdown/power-down. The device controls the ramping of the DC bias voltage on the output-coupling capacitors and the application of the audio signal to ensure that no audible transients are present at the headphones. The MAX9890A features a 200ms startup time for use with up to 100µF coupling capacitors. The MAX9890B features a 330ms startup time for use with greater than 100µF coupling capacitors. The MAX9890 consumes 14µA of supply current and 0.001µA in shutdown, while contributing less than 0.003% THD+N into a 32Ω load. ESD (Human Body Model) protection circuitry on the outputs protect the MAX9890 and devices further up the signal chain from ESD strikes up to ±8kV. The MAX9890 is available in a miniature (1.5mm x 1.5mm x 0.6mm) 9-bump chip-scale package (UCSP™), as well as an 8-pin TDFN package (3mm x 3mm x 0.8mm), and is specified for operation over the -40°C to +85°C extended temperature range.

Key Features 36dB Click-Pop Suppression 2.7V to 5.5V Single-Supply Operation Clickless/Popless Startup/Power-Up and Shutdown/Power-Down 0.001µA Low-Power Shutdown Mode THD+N < 0.003% Into 32Ω ±8kV ESD Protected Outputs (Human Body Model) Requires Only One 0.1µF Capacitor to Complete the Circuit Low 14µA Supply Current Tiny Packaging 9-Bump UCSP (1.5mm x 1.5mm x 0.6mm) 8-Pin TDFN (3mm x 3mm x 0.8mm)

MAX9890: Typical Application Circuit Applications/Uses Cell Phones High-End Notebook Audio PDAs Portable DVD Players Portable MP3 Players

DataSheet

Parametrics

Design kits & evaluation modules

• MAX9890EVKIT

Quality and Environmental Data

• MAX9890.pdf

Ordering Information