MAXQ616：Infrared Remote Control System-on-Chip _ BDTIC a Leading Distributor in China

MAXQ616：Infrared Remote Control System-on-Chip

Save Power, Cost and Board Space: 16-Bump WLP Reduces Board Space Requirements by 50%

The MAXQ616 is a low-power, 16-bit MAXQ® microcontroller designed for low-power applications including universal remote controls, consumer electronics, and white goods. The device combines a powerful 16-bit RISC microcontroller and integrated peripherals including a universal synchronous/asynchronous receiver-transmitter (USART), an SPI master/slave and I²C communications ports, along with an IR module with carrier frequency generation and flexible port I/O capable of multiplexed keypad control. An internal amplifier eliminates the need for external circuitry to drive the IR receiver pin. The device includes 80KB of flash memory and 2KB of data SRAM. For the ultimate in low-power battery-operated performance, the device includes an ultra-low-power stop mode (0.2µA typ). In this mode, the minimum amount of circuitry is powered. Wake-up sources include external interrupts, the power-fail interrupt, and a timer interrupt. The microcontroller runs from a wide 1.67V to 3.6V operating voltage.

Key Features

High-Performance, Low-Power, 16-Bit RISC Core
Internal 12MHz Oscillator Requires no External Components
1.67V to 3.6V Operating Voltage
33 Total Instructions for Simplified Programming
Three Independent Data Pointers Accelerate Data Movement with Automatic Increment/Decrement
Dedicated Pointer for Direct Read from Code Space
16-Bit Instruction Word, 16-Bit Data Bus
16 x 16-Bit General-Purpose Working Registers
Memory Features
- 80KB Flash Memory
- 2KB Data SRAM
Additional Peripherals
- Power-Fail Warning
- Power-On Reset (POR)/Brownout Reset
- Automatic IR Carrier Frequency Generation and Modulation
- IR Learning Amplifier
- IR Transit Driver with 200mA (min) Sink Current at 1.8V
- Two 16-Bit Programmable Timers/Counters with Prescaler and Capture/Compare
- One SPI, One I²C, and One USART Port
- Programmable Watchdog Timer
- 8kHz Nanopower Ring Oscillator Wake-Up Timer
- Up to 10 General-Purpose I/Os
Low Power Consumption
- 0.2µA (typ), 2.0µA (max) in Stop Mode, TA = +25°C, Power-Fail Monitor Disabled
- 2.0mA (typ) at 12MHz in Active Mode

Applications/Uses

Universal Remote Controls for Smartphones
Universal Remote Controls for Tablets

DataSheet

title	Download file
Errata MAXQ616	MAXQ616_A3.pdf

Parametrics

Part Number	MCU Core	Core Clock Speed (MHz)	Data Processing	Internal Flash (KBytes)	Internal SRAM (KBytes)	USARTs	SPI Bus	I²C Bus	GPIO Pins	Timer Features	Package/Pins
Part Number	MCU Core	max	Data Processing	Internal Flash (KBytes)	Internal SRAM (KBytes)	USARTs	SPI Bus	I²C Bus	max	Timer Features	Package/Pins
MAXQ616	MAXQ20S	12	16-bit	80	2	2	1	1 Master/Slave	16	IR Timer	WLP/16

Quality and Environmental Data

MAXQ616.pdf

Ordering Information

Part Number	Status	Package	Temp	RoHS
MAXQ616V-L000+T	Active	WLP,;16 pin;WLP;	0°C to +70°C	Lead Free
MAXQ616V-L001+T	Active	WLP,;16 pin;WLP;	0°C to +70°C	Lead Free
MAXQ616V-L002+T	No Longer Available	WLP,;16 pin;WLP;	0°C to +70°C	Lead Free

MAXQ616_A3.pdf MAXQ616

MAXQ616.pdf MAXQ616