MXL1535E:+3V to +5V, 2500VRMS Isolated RS-485/RS-422 Transceivers with ±15kV ESD Protection

The MAX3535E/MXL1535E isolated RS-485/RS-422 full-duplex transceivers provide 2500VRMS of galvanic isolation between the RS-485/RS-422 side and the processor or control logic side. These devices allow fast, 1000kbps communication across an isolation barrier when the common-mode voltages (i.e., the ground potentials) on either side of the barrier are subject to large differences. Isolation is achieved through integrated high-voltage capacitors. The MAX3535E/MXL1535E also feature a 420kHz transformer driver that allows power transfer to the RS-485 side using an external transformer. The MAX3535E/MXL1535E include one differential driver, one receiver, and internal circuitry to send the RS-485 signals and control signals across the isolation barrier (including the isolation capacitors). The MAX3535E/MXL1535E RS-485 receivers are 1/8 unit load, allowing up to 256 devices on the same bus. The MAX3535E/MXL1535E feature true fail-safe circuitry. The driver outputs and the receiver inputs are protected from ±15kV electrostatic discharge (ESD) on the interface side, as specified in the Human Body Model (HBM). The MAX3535E/MXL1535E feature driver slew-rate select that minimizes electromagnetic interference (EMI) and reduces reflections. The driver outputs are short-circuit and overvoltage protected. Other features are hot-swap capability and isolation-barrier fault detection. The MAX3535E operates with a single +3V to +5.5V power supply. The improved secondary supply range of the MAX3535E allows the use of step-down transformers for +5V operation, resulting in considerable power savings. The MXL1535E operates with a single +4.5V to +5.5V power supply. The MXL1535E is a function-/pin-compatible improvement of the LTC1535. The MAX3535E/MXL1535E are available over the commercial 0°C to +70°C and extended -40°C to +85°C temperature ranges.

Key Features
  • 2500VRMS RS-485 Bus Isolation Using On-Chip High-Voltage Capacitors
  • 1000kbps Full-Duplex RS-485/RS-422 Communication
  • +3V to +5.5V Power-Supply Voltage Range (MAX3535E)
  • +4.5V to +5.5V Power-Supply Voltage Range (MXL1535E)
  • 1/8 Unit Receiver Load, Allowing 256 Devices on Bus
  • ±15kV ESD Protection Using HBM
  • Pin-Selectable Slew-Rate Limiting Controls EMI
  • Hot-Swap-Protected Driver-Enable Input
  • Undervoltage Lockout
  • Isolation-Barrier Fault Detection
  • Short-Circuit Protected
  • Thermal Shutdown
  • Open-Line and Shorted-Line Fail-Safe Receiver Inputs
MAX3535E, MXL1535E: Typical Operating Circuit
MAX3535E, MXL1535E: Typical Operating Circuit
Applications/Uses
  • Industrial-Control Local Area Networks
  • Isolated RS-485 Systems
  • Systems with Large Common-Mode Voltages
  • Telecommunications Systems
DataSheet
titleDownload file
MAX3535E-MXL1535E Data SheetMAX3535E-MXL1535E.pdf
Parametrics
Part NumberTx/RxDuplexVSUPPLY
(V)
Galvanic Isolation
(±V)
ICC
(mA)
Data Rate
(kbps)
ESD Protect.
(±kV)
Tx ENRx ENRx/Tx on BusRx Failsafe w/ InputsSlew Rate LimitingOper. Temp.
(°C)
Package/PinsBudgetary
Price
typminSee Notes
MAX3535E1Tx + 1RxFull3.3
3.0 to 5.5
5
250016100015YesYes256Open or ShortedNo-40 to +85
0 to +70
SOIC(W)/28$6.03 @1k
MXL1535E5-SOIC(W)/28
Design kits & evaluation modules
Quality and Environmental Data
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MXL1535ECWILast Time BuySOIC(W),;28 pin;192.8 mm²0°C to +70°CNo
MXL1535ECWI+ActiveSOIC(W),;28 pin;192.8 mm²0°C to +70°CLead Free
MXL1535ECWI+TActiveSOIC(W),;28 pin;192.8 mm²0°C to +70°CLead Free
MXL1535ECWI-TNo Longer AvailableMXL1535ECWI+TW.SO;28 pin0°C to +70°CSee data sheet
MXL1535EEWILast Time BuySOIC(W),;28 pin;192.8 mm²-40°C to +85°CNo
MXL1535EEWI-TNo Longer AvailableMXL1535EEWI+TW.SO;28 pin-40°C to +85°CSee data sheet
MAX3535E-MXL1535E.pdf MXL1535E
MAX3535E-MXL1535E_cn.pdf MXL1535E
MXL1535E.pdf MXL1535E
MAX3535E-MXL1535E_cn.pdf MXL1535E