• 简体中文
• English

MIC2588

The MIC2588 and the MIC2594 are single-channel, negative-voltage hot swap controllers designed to address the need for safe insertion and removal of circuit boards into "live" high-voltage system backplanes, while using very few external components. The MIC2588 and the MIC2594 are each available in an 8-pin SOIC package and work in conjunction with an external N-Channel MOSFET for which the gate drive is controlled to provide inrush current limiting and output voltage slew-rate control. Overcurrent fault protection is also provided and includes a programmable overcurrent threshold. During an output overload condition, a constant-current regulation loop is engaged to ensure that the system power supply maintains regulation. If a fault condition exceeds a built-in 400µs nuisance-trip delay, the MIC2588 and the MIC2594 will latch the circuit breaker's output off and will remain in the off state until reset by cycling either the UV/OFF pin or the power to the IC. A master Power-Good signal is provided to indicate that the output voltage of the soft-start circuit is within its valid output range. This signal can be used to enable one or more DC-DC converter modules.

Documents

MIC2588/MIC2594-Single-Channel, Negative High-Voltage Hot Swap Power Controllers	Data Sheets	11/05/2015	1079KB
Micrel AN 108 - Universal Serial Bus Power Management	AppNote	10/02/2015	125KB
Micrel AN 21 - Dual Current-Limiting Switch for USB Applications	AppNote	10/01/2015	36KB

Ordering Information

Similar Devices

RoHS Information

PartNumber	DeviceWeight	ShippingWeight	LeadCount	PackageType	PackageWidth	SolderComposition	JEDECIndicator	RoHS	ChinaEFUP
MIC2588-1YM	0.075000	0.163265	8	SOIC	3.90mm(.150in)	NiPdAu	e4
MIC2588-1YM-TR	0.075000	0.250000	8	SOIC	3.90mm(.150in)	NiPdAu	e4
MIC2588-2YM	0.075000	0.163265	8	SOIC	3.90mm(.150in)	NiPdAu	e4
MIC2588-2YM-TR	0.075000	0.250000	8	SOIC	3.90mm(.150in)	NiPdAu	e4