PIC18F13K50 _ BDTIC a Leading Distributor in China

PIC18F13K50

The PIC18F13K50 brings advanced features and exceptional value to the embedded USB market. This low cost PIC® Microcontroller features a full speed USB 2.0 compliant interface that can automatically change clock sources and power levels upon connection to a host, making it an exceptional device for battery-powered applications. The addition of mTouch(TM) touch sensing compatibility, a 10-bit ADC, motor control PWMs, and a host of serial interfaces make the PIC18F13K50 the perfect device to "Just add USB" to any application.
Debug Support
• A debug header is required for this device
• Part Numbers:, AC244023 (F) / AC244024 (LF)
• Debug and programming support is available via PICkit™ 3, and MPLAB® ICD 3
• For Debug Header information, please refer to

Features

C Compiler optimized architecture
Self-programmable under software control
Support for Interrupt Priority Levels
8x8 Single-Cycle Hardware Multiplier
Enhanced Watchdog Timer with a programmable period
USB v2.0 compliant interface
Supports both Low Speed and Full Speed operation
Supports Control, Interrupt, Isochronous and Bulk transfer
Up to 16 Endpoints (or up to 8 bidirectional)
Automatic detection of physical connection to USB host
256-byte Dual Access RAM
Can be internally clocked up to 48MHz
Fully tunable Internal Oscillator Supplies frequencies from 31KHz to 16MHz Can be user-adjusted for frequency drift
Supplies frequencies from 31KHz to 16MHz
Can be user-adjusted for frequency drift
Internal 4x Phase Lock Loop (PLL) Can be used with External or Internal Oscillators
Can be used with External or Internal Oscillators
Fail-safe Clock Monitor Allows for safe shutdown during oscillator failure
Allows for safe shutdown during oscillator failure
Dual Capture/Compare/PWM interfaces Up to 5 PWM Outputs Programmable dead time, auto shutdown/restart
Up to 5 PWM Outputs
Programmable dead time, auto shutdown/restart
Master I2C/SPI Interface Supports all modes of 3-wire SPI I2C™Compatible Master and Slave modes with address masking
Supports all modes of 3-wire SPI
I2C™Compatible Master and Slave modes with address masking
Enhanced Addressable USART Module Supports RS-485, RS-232, and LIN 2.0
Supports RS-485, RS-232, and LIN 2.0
10-bit, 9-channel ADC Module Can acquire & convert samples automatically Can operate in sleep mode
Can acquire & convert samples automatically
Can operate in sleep mode
mTouch(TM) compatible Analog Comparators w/ SR Latch Rail to Rail operation Independent input multiplexing
Rail to Rail operation
Independent input multiplexing
Robust GPIO with 25mA sink/source current
Programmable On-chip Voltage Reference
Can be used with Comparators or ADC
1.8 to 5.6V Operating Range
Software Programmable Brown-out Reset feature
Four power-managed operating modes
Two-speed clock startup option

Parameter

Parameter Name Value	Value
Program Memory Type Flash	Flash
Program Memory (KB) 8	8
CPU Speed (MIPS) 12	12
RAM Bytes 512	512
Data EEPROM (bytes) 256	256
Digital Communication Peripherals 1-UART, 1-A/E/USART, 1-SPI, 1-I2C1-MSSP(SPI/I2C)	1-UART, 1-A/E/USART, 1-SPI, 1-I2C1-MSSP(SPI/I2C)
Capture/Compare/PWM Peripherals 1 ECCP /	1 ECCP /
Timers 1 x 8-bit, 3 x 16-bit	1 x 8-bit, 3 x 16-bit
ADC 9 ch, 10-bit	9 ch, 10-bit
Comparators 2	2
USB (ch, speed, compliance) 1, FS Device, USB 2.0	1, FS Device, USB 2.0
Temperature Range (C) -40 to 125	-40 to 125
Operating Voltage Range (V) 1.8 to 5.5	1.8 to 5.5
Pin Count 20	20
XLP Yes	Yes
Cap Touch Channels 9	9

Documents

PIC18(L)F1XK50 20-Pin USB Flash Microcontrollers with XLP Technology	Data Sheets	04/17/2015	3985KB
PIC18(L)F1XK50 Silicon Errata and Data Sheet Clarification	Errata	03/10/2015	115KB
PIC18F1XK50/PIC18LF1XK50 Flash Memory Programming	Programming Specification	05/19/2010	497KB
AN1204 - Microchip MiWi P2P Wireless Protocol	AppNote	11/16/2010	417KB
AN1229 - Class B Safety Software Library for PIC MCUs and dsPIC DSCs	AppNote	04/24/2012	439KB
AN1267 - nanoWatt & nanoWatt XLP(TM) Technologies: An Introduction to Microchip's Low Power devices	AppNote	10/08/2009	259KB
AN1310 - High-Speed Bootloader for PIC16 and PIC18 Devices	AppNote	02/03/2010	482KB
AN1416 - Low-Power Design Guide	AppNote	11/30/2011	274KB
AN1450 - Delay Block/Debouncer	AppNote	07/30/2012	1414KB
AN1921 - Microchip TCP/IP Lite Stack	AppNote	11/16/2015	264KB
AN2045 - Interfacing Serial EEPROMs with 8-Bit PIC Microcontrollers	AppNote	01/21/2016	2087KB
AN2059 - LIN Basics and Implementation of the MCC LIN Stack Library on 8-Bit PIC Microcontrollers	AppNote	02/24/2016	816KB
8-bit PIC® Microcontroller Solutions	Brochures	05/02/2014	6041KB
Core Independent Peripherals for 8-bit PIC(R) Microcontrollers Brochure	Brochures	11/11/2012	3731KB
eXtreme Low Power (XLP) PIC® MCUs Brochure	Brochures	06/08/2016	4336KB
MPLAB® X IDE Product Overview	Sell Sheets	07/11/2011	182KB
PIC18F13K50/PIC18F14K50 Microcontrollers Product Overview	Sell Sheets	01/20/2011	167KB
AN1921 Source code	AppNoteLiterature	09/10/2015	16041KB
AN2045 EXP8I2CClick.X.zip	AppNoteLiterature	01/21/2016	684KB
AN2045 EXP8SPIClick.X.zip	AppNoteLiterature	01/21/2016	417KB
PIC18F1XK50 Product Brief	Product Brief	06/28/2007	281KB
Corporate Product Selector Guide	Product Line Card	04/13/2016	10173KB
PIC Microcontroller Compiled Tips 'n Tricks Guide	Tips and Tricks	04/22/2009	5964KB
PIC® MCU Tips 'n Tricks Featuring nanoWatt XLP Technology	Tips and Tricks	04/22/2009	643KB
Low Pin Count USB Development Kit User's Guide	User Guides	07/02/2014	1572KB

Ordering Information

Part Number	Leads	Package Type	Temp Range	Packing	1+	26+	100+	1000+	5000+
PIC18F13K50-E/P	20	PDIP	-40C to +125C	TUBE	2.08	2.03	1.98	1.82	1.74
PIC18F13K50-E/SO	20	SOIC	-40C to +125C	TUBE	2.04	1.99	1.94	1.79	1.70
PIC18F13K50-E/SS	20	SSOP	-40C to +125C	TUBE	1.83	1.79	1.74	1.60	1.53
PIC18F13K50-I/MQ	20	QFN	-40C to +85C	TUBE	1.86	1.77	1.68	1.55	1.47
PIC18F13K50-I/P	20	PDIP	-40C to +85C	TUBE	2.20	2.01	1.82	1.68	1.60
PIC18F13K50-I/SO	20	SOIC	-40C to +85C	TUBE	2.16	1.98	1.79	1.65	1.57
PIC18F13K50-I/SS	20	SSOP	-40C to +85C	TUBE	1.91	1.75	1.58	1.46	1.39
PIC18F13K50T-I/MQ	20	QFN	-40C to +85C	T/R	1.89	1.80	1.71	1.58	1.50
PIC18F13K50T-I/SO	20	SOIC	-40C to +85C	T/R	2.20	2.01	1.82	1.68	1.60
PIC18F13K50T-I/SS	20	SSOP	-40C to +85C	T/R	1.97	1.80	1.63	1.50	1.43
PIC18LF13K50-I/MQ	20	QFN	-40C to +85C	TUBE	1.86	1.77	1.68	1.55	1.47
PIC18LF13K50-I/P	20	PDIP	-40C to +85C	TUBE	2.20	2.01	1.82	1.68	1.60
PIC18LF13K50-I/SO	20	SOIC	-40C to +85C	TUBE	2.16	1.98	1.79	1.65	1.57
PIC18LF13K50-I/SS	20	SSOP	-40C to +85C	TUBE	1.91	1.75	1.58	1.46	1.39
PIC18LF13K50T-I/MQ	20	QFN	-40C to +85C	T/R	1.89	1.80	1.71	1.58	1.50
PIC18LF13K50T-I/SO	20	SOIC	-40C to +85C	T/R	2.20	2.01	1.82	1.68	1.60
PIC18LF13K50T-I/SS	20	SSOP	-40C to +85C	T/R	1.97	1.80	1.63	1.50	1.43

Similar Devices

Product	Pins	Flash	RAM	Price5K	Notes
PIC18F13K50	20	8	512	$1.39
PIC18F14K50	20	16	768	$1.53

RoHS Information

PartNumber	DeviceWeight	ShippingWeight	LeadCount	PackageType	PackageWidth	SolderComposition	JEDECIndicator
PIC18F13K50-E/P	1.512900	2.500000	20	PDIP	.300in	Matte Tin	e3
PIC18F13K50-I/P	1.512900	2.500000	20	PDIP	.300in	Matte Tin	e3
PIC18F13K50-E/SO	0.542000	0.973684	20	SOIC	.300in	Matte Tin	e3
PIC18F13K50T-I/SO	0.542000	0.311875	20	SOIC	.300in	Matte Tin	e3
PIC18F13K50-I/SO	0.542000	0.973684	20	SOIC	.300in	Matte Tin	e3
PIC18F13K50-I/SS	0.164200	0.343284	20	SSOP	.209in	Matte Tin	e3
PIC18F13K50-E/SS	0.164200	0.343284	20	SSOP	.209in	Matte Tin	e3
PIC18F13K50T-I/SS	0.164200	0.416250	20	SSOP	.209in	Matte Tin	e3
PIC18F13K50/SS	0.164200	0.343284	20	SSOP	.209in	Matte Tin	e3
PIC18F13K50T/SS	0.164200	0.416250	20	SSOP	.209in	Matte Tin	e3
PIC18F13K50-I/MQ	0.067130	0.109589	20	QFN	5x5x0.9mm	Matte Tin	e3
PIC18F13K50T-I/MQ	0.067130	0.166970	20	QFN	5x5x0.9mm	Matte Tin	e3