SST26WF016B

The SST26WF016B Serial Quad I/O (SQI) flash device utilizes a 4-bit multiplexed I/O serial interface to boost performance while maintaining the compact form factor of standard serial flash devices. SST26WF016B also supports full command-set compatibility to traditional Serial Peripheral Interface (SPI) protocol. Operating at frequencies reaching 104 MHz, the SST26WF016B enables minimum latency execute-in-place (XIP) capability without the need for code shadowing on an SRAM. The SST26WF016B writes (Program or Erase) with a single power supply of 1.65-1.95V and significantly lower power consumption. The device’s low power consumption makes it the ideal choice for Mobile handset, Bluetooth, GPS, camera module, table, hearing aid and any battery powered devices. Further benefits are achieved with SST’s proprietary, high-performance CMOS SuperFlash® technology, which significantly improves performance and reliability.

The SST26WF016B default at power up is with WP# and HOLD pins enable and SIO2 and SIO3 pins disable allowing for SPI protocol operations without register configuration.
The SST26WF016BA default at power up is with WP# and HOLD pins disable and SIO2 and SIO3 pins enable allowing for Quad I/O operations without register configuration.

Features
  • Serial Interface Architecture: Nibble-wide multiplexed I/O’s with SPI-like serial command structure
  • Mode 0 and Mode 3
  • x1/x2/x4 Serial Peripheral Interface (SPI) Protocol -Burst Modes
  • Continuous linear burst, 8/16/32/64 Byte linear burst with wrap-around
  • Page-Program: 256 Bytes per page in x1 or x4 mode
  • Flexible Erase Capability: Uniform 4 KByte sectors, Four 8 KByte top and bottom parameter overlay blocks, One 32 KByte top and bottom overlay block, Uniform 64 KByte overlay blocks
  • Software Write Protection: Individual Block-Locking: 64 KByte blocks, two 32 KByte blocks, and eight 8 KByte parameter blocks
  • Low Power Consumption: Active Read current: 15 mA (typical at 104 MHz), Standby Current: 10 µA (typical)
  • SFDP (Serial Flash Discoverable Parameters)
  • Packages Available: 8-contact WSON (6mm x 5mm), 8-lead SOIC (150 mil), 8-ball XFBGA (Z-Scale)
  • All devices are RoHS compliant
Parameter
Parameter Name Value Value
Density 16 Mbit 16 Mbit
Op. Volt Range (V) 1.65 to 1.95 1.65 to 1.95
Max. Clock Freq. 104 MHz 104 MHz
Page Size (bytes) 256 256
Write Protect Full Array Full Array
Temp Range (°C) -40°C to +85°C -40°C to +85°C
Endurance 100,000 100,000
Data Retention (Years) 100 100
Bus Modes SPI,SDI,SQI SPI,SDI,SQI
Documents
SST26WF016B/SST26WF016BA-1.8V Serial Quad I/O (SQI) Flash MemoryData Sheets06/10/2014965KB
Memory Products BrochureBrochures02/05/20154696KB
SST26WF016B Software DriverSoftware11/12/2014118KB
SST26WF016B IBIS ModelsIBIS11/12/20149KB
Verilog Model - SST26WF016B DeviceVerilog03/22/2016114KB
Corporate Product Selector GuideProduct Line Card04/13/201610173KB
Ordering Information
Part NumberLeadsPackage TypeTemp RangePacking1+26+100+1000+5000+
SST26WF016B-104I/MF8TDFN-S-40C to +85CTUBE1.381.331.271.211.14
SST26WF016B-104I/SN8SOIC-40C to +85CTUBE1.201.161.111.050.99
SST26WF016BT-104I/CS8CSP-40C to +85CT/R1.441.391.331.261.19
SST26WF016BT-104I/MF8TDFN-S-40C to +85CT/R1.421.371.321.241.17
SST26WF016BT-104I/SN8SOIC-40C to +85CT/R1.241.201.151.091.03
相关开发工具
Similar Devices
ProductMemory SizeMemory SpeedPackagePrice5K
SST25VF016B16M80 MHzSOIJ-8, TDFN-S-8$1.10
SST26VF01616000K80 MHzSOIJ-8, TDFN-S-8$0.87
SST26VF016B104 MHzSOIC 150mil-8, SOIJ-8, TDFN-S-8$0.96
SST26WF016B16Mb104 MHzCSP-8, SOIC 150mil-8, TDFN-S-8$0.99
SST26WF016BA16Mb104 MHzCSP-8, SOIC 150mil-8, TDFN-S-8$1.04
RoHS Information
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
SST26WF016B-104I/SN0.0780000.1600008SOIC.150In(3.90mm)Matte Tine3
SST26WF016BA-104I/SN0.0780000.1600008SOIC.150In(3.90mm)Matte Tine3
SST26WF016BT-104I/SN0.0780000.2303038SOIC.150In(3.90mm)Matte Tine3
SST26WF016BAT-104I/SN0.0780000.2303038SOIC.150In(3.90mm)Matte Tine3
SST26WF016BA-104I/MF0.0738000.1632658TDFN-S6x5x0.8mmMatte Tine3
SST26WF016BAT-104I/MF0.0738000.2000008TDFN-S6x5x0.8mmMatte Tine3
SST26WF016BT-104I/MF0.0738000.2000008TDFN-S6x5x0.8mmMatte Tine3
SST26WF016B-104I/MF0.0738000.1632658TDFN-S6x5x0.8mmMatte Tine3
SST26WF016BT-104I/CS0.0050000.0503338CSPVariesSACe1
SST26WF016BAT-104I/CS0.0050000.0503338CSPVariesSACe1
SST26WF016B/SST26WF016BA-1.8V Serial Quad I/O (SQI) Flash Memory SST26WF016BA
Memory Products Brochure SST49LF080A
SST26WF016B Software Driver AC243005-2
SST26WF016B IBIS Models SST26WF016BA
Corporate Product Selector Guide SST49LF080A