UCS1003

The UCS1003 provides a USB port power switch for precise control of up to 2.7 amperes continuous current with over-current limit (OCL), dynamic thermal management, latch or auto-recovery (low test current) fault handling, selectable active low or high enable, under- and over-voltage lockout, back-drive protection, back-voltage protection and charge active signal*.

Split supply support for VS and VDD is an option for low power in system standby states. This gives battery operated applications, like notebook PCs, the ability to detect attachments from a sleep or off state. After the Attach Detect is flagged, the system can decide to wake up and/or provide charging.

In addition to power switching and current limiting modes, the UCS1003 will automatically charge a wide variety of portable devices, including USB-IF BC1.2, YD/T-1591 (2009), most Apple®, Samsung, and RIM®, and many others. Nine preloaded charger emulation profiles maximize compatibility coverage of peripheral devices. As well, a customizable charger emulation profile** is available to accommodate unique existing and future portable device handshaking/signature requirements.

The UCS1003 also provides current monitoring** to allow intelligent management of system power and charge rationing for controlled delivery of current regardless of the host power state. This is especially important for battery operated applications that want to provide power in a standby and/or off state but do not want to drain the battery excessively.

The UCS1003 is available in a 20-pin QFN 4 mm x 4 mm package.

*UCS1003-2 only
** UCS1003-1 only

Features
  • Port power switch with two current limit behaviors 2.9 V to 5.5 V source voltage range Up to 2.7 A current with 55 mΩ On Resistance Over-current trip or constant current limiting Soft turn-on circuitry Programmable current limit Dynamic thermal management Under- and over-voltage lockout Back-drive, back-voltage protection Latch or auto-recovery (low test current) fault handling Selectable active high or low power switch enable BC1.2 VBUS discharge port renegotiation function
  • 2.9 V to 5.5 V source voltage range
  • Up to 2.7 A current with 55 mΩ On Resistance
  • Over-current trip or constant current limiting
  • Soft turn-on circuitry
  • Programmable current limit
  • Dynamic thermal management
  • Under- and over-voltage lockout
  • Back-drive, back-voltage protection
  • Latch or auto-recovery (low test current) fault handling
  • Selectable active high or low power switch enable
  • BC1.2 VBUS discharge port renegotiation function
  • Selectable/automatic cycling of USB data line charger emulation profiles Supports 12W charger emulation Allows for active cables USB-IF BC1.2 charging downstream port (CDP) and dedicated charging port (DCP) modes, YD/T-1591, and most Apple®, Samsung and RIM® protocols standard; others as defined via the SMBus 2.0/I2C® USB 2.0 compliant high-speed data switch (in Passthrough and CDP modes) Nine preloaded charger emulation profiles for maximum compatibility coverage of peripheral devices One custom programmable charger profile for portable device support for fully host controlled charger emulation** Custom Emulation profile uses unique stimulus and response method useful for future profiles**
  • Supports 12W charger emulation
  • Allows for active cables
  • USB-IF BC1.2 charging downstream port (CDP) and dedicated charging port (DCP) modes, YD/T-1591, and most Apple®, Samsung and RIM® protocols standard; others as defined via the SMBus 2.0/I2C®
  • USB 2.0 compliant high-speed data switch (in Passthrough and CDP modes)
  • Nine preloaded charger emulation profiles for maximum compatibility coverage of peripheral devices
  • One custom programmable charger profile for portable device support for fully host controlled charger emulation**
  • Custom Emulation profile uses unique stimulus and response method useful for future profiles**
  • Self-contained current monitoring and charge rationing for power allocation applications
  • Automatic shutdown when Battery Full option
  • Low power Attach Detection and open-drain A_DET# pin (not in UCS1003-2)
  • Charge active signal (UCS1003-2 only)
  • Ultra low power Sleep state
  • Optional split supply support for VBUS and VDD for low power in system standby states
  • Wake on Attach USB
  • SMBus 2.0/I2C communications Supports Block Write and Read Multiple SMBus addresses
  • Supports Block Write and Read
  • Multiple SMBus addresses
  • Wide operating temperature range: -40°C to +85°C
  • IEC61000-4-2 8 / 15 kV ESD immunity
  • Notebook and Netbook Computers
  • Tablets and E-book Readers
  • Desktops and Monitors
  • Docking Stations and Printers
  • AC-DC wall adapters
Parameter
Parameter Name Value Value
Description Programmable USB Port Power Controller with Charger Emulation Programmable USB Port Power Controller with Charger Emulation
Hi-Speed USB 2.0 Switch 1 1
USB Port Power Switch 1 1
Battery Charger Emulation Profiles 10 10
8 Resistor Set Current Limits Up to 2.7A Up to 2.7A
Charging Indicator Output yes yes
Power Allocation yes yes
Attach Detection Output yes yes
Interface I2C /SMBus I2C /SMBus
Current Measurement yes yes
Documents
UCS1003-1/2/3 Data SheetData Sheets12/10/20151565KB
AN 24.14 - UCS1002 Fundamentals of Custom Charger EmulationAppNote10/29/2013578KB
AN 25.16 - USB Charging Port ESD Protection Tips for UCS100xAppNote10/24/2013287KB
AN 25.4 - UCS1002 Advanced Custom ChargingAppNote10/28/2013468KB
AN 25.5 - UCS1002 Smart Bettery Charger Hardware Reference DesignAppNote11/08/2013202KB
AN 25.7 - UCS1002 Charge RationingAppNote11/07/2013528KB
AN 26.0 - AN 26.0 UCS1001 Current Limit Operation and FeaturesAppNote11/20/2013110KB
AN1827 - AN1827 - UCS1002 Highest Current Algorithm Using a PIC® MicrocontrollerAppNote12/01/2014113KB
TB3135 - Recommendations for Connecting UCSX100X Devices to Power SuppliesAppNote04/24/201569KB
UCS1002 Evaluation Board (ADM00497) Software.Software02/12/2014135021KB
UCS1002 Evaluation Board (ADM00497) BOMBOM09/10/201331KB
UCS1002 Evaluation Board (ADM00497) GerbersGerber Files09/10/2013615KB
UCS1002 Evaluation Board (ADM00497) SchematicsSchematics09/10/201361KB
UCS1003Silicon Product09/30/20140B
Similar Devices
ProductBattery Charger Emulation ProfilesCharging Indicator OutputAttach Detection OutputPrice5K
UCS1001-19yes$0.90
UCS1001-29yes$0.90
UCS1001-39yes$0.90
UCS1001-49yes$0.90
UCS1002-110yes$1.29
UCS1002-210yes$1.29
UCS100310yesyes
UCS1003-110yesyes$1.29
UCS21120yes$1.80
UCS8100110yes
UCS8100210yes
UCS8100310yes$1.72
RoHS Information
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
UCS1003-1-BP0.0431000.63265320QFN4x4x0.9mmMatte Tine3
UCS1003-1-BP-TR0.0431000.21212120QFN4x4x0.9mmMatte Tine3
UCS1003-2-BP0.0431000.63265320QFN4x4x0.9mmMatte Tine3
UCS1003-2-BP-TR0.0431000.21212120QFN4x4x0.9mmMatte Tine3
UCS1003-3-BP0.0431000.63265320QFN4x4x0.9mmMatte Tine3
UCS1003-3-BP-TR0.0431000.21212120QFN4x4x0.9mmMatte Tine3
UCS1003-1/2/3 Data Sheet UCS1003-1
AN 24.14 UCS1003
AN 25.16 UCS1003
AN 25.4 UCS1003-1
AN 25.5 UCS1003
AN 25.7 UCS1003-1
AN 26.0 UCS1003-1
AB1827 UCS1003
TB3135 UCS1003
UCS1002 Evaluation Board (ADM00497) Software. UCS1003-1
UCS1002 Evaluation Board (ADM00497) BOM UCS1003-1
UCS1002 Evaluation Board (ADM00497) Gerbers UCS1003-1
UCS1002 Evaluation Board (ADM00497) Schematics UCS1003-1