NX5P2090UK: Logic controlled high-side power switch
The NX5P2090 is an advanced power switch for USB OTG applications. It includes under-voltage and over-voltage lockout, over-current, over-temperature, reverse bias and in-rush current protection circuits. These are designed to automatically isolate a VBUS OTG voltage source from a VBUS interface pin when a fault occurs. The device features two power switch terminals, one input (VINT) and one output (VBUS); a current limit input (ILIM) for defining the over-current and in-rush current limit; a voltage detect output (VDET) to monitor the voltage level on VBUS; an open-drain fault output (FAULT) to indicate when a fault condition has occurred and an enable input (EN) to control the state of the switch. When EN is set LOW the device enters a low-power mode, disabling all protection circuits except the under-voltage lockout. The low-power mode can be entered at anytime unless the over temperature protection circuit has been triggered.
Designed for operation from 3 V to 5.5 V, it is used in power domain isolation applications to protect from out of range operation. The enable input includes integrated logic level translation making the device compatible with lower voltage processors and controllers.
wlcsp9_nx5p2090uk_3d
Data Sheets (1)
| Name/Description | Modified Date |
|---|---|
| Logic controlled high-side power switch (REV 2.1) PDF (639.0 kB) NX5P2090 | 15 Jan 2015 |
Brochures (2)
| Name/Description | Modified Date |
|---|---|
| NXP® Interface (日本語、pdf) (REV 1.0) PDF (1.6 MB) INTERFACE_FOLDER_FOR_WEB_JP | 22 Jan 2015 |
| NXP® Load Switches and Over-Voltage Protection ICs: Simple, efficient, protection and control with... (REV 1.0) PDF (424.0 kB) 75017475 | 06 Sep 2013 |
White Papers (1)
| Name/Description | Modified Date |
|---|---|
| NXP® Load Switch Basics (REV 1.0) PDF (348.0 kB) NXP_LOAD_SWITCH_BASICS | 17 Nov 2015 |
Package Information (2)
| Name/Description | Modified Date |
|---|---|
| Wafer level chip-size package; 9 bumps (REV 1.0) PDF (151.0 kB) OL-NX5P2090UK | 08 Feb 2016 |
| wafer level chip-size package; 8 bumps (3 x 3 - A1) (REV 1.0) PDF (366.0 kB) WLCSP9_NX5P2090UK_PO | 27 Mar 2013 |
Ordering Information
| Product | Status | Family | Function | VCC (V) | Logic switching levels | Description | Package version | RON (mOhm) | ISW (A) | tON (ms) | Rdch | Power dissipation considerations | Tamb (Cel) | Rth(j-a) (K/W) | Ψth(j-top) (K/W) | Rth(j-c) (K/W) | No of pins | Package name |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NX5P2090UK | Active | NX5 | 3.0 - 5.5 | low threshold | logic controlled high-side power switch for USB-OTG | OL-NX5P2090UK | 60 | 2.0 | 0.63 | very low | -40~85 | 73 | 9 | WLCSP |
Package Information
| Product ID | Package Description | Outline Version | Reflow/Wave Soldering | Packing | Product Status | Part NumberOrdering code(12NC) | Marking | Chemical Content | RoHS / Pb Free / RHF | LeadFree Conversion Date | MSL | MSL LF |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NX5P2090UK | | wlcsp9_nx5p2090uk_po | Reel 7" Q1/T1 in Drypack | Active | NX5P2090UKZ (9353 010 41012) | Standard Marking | NX5P2090UK |    | Always Pb-free | 1 | 1 |
- Logic controlled high-side power switch nx5p2090uk
