BlueNRG：Bluetooth® low energy wireless network processor
The BlueNRG is a very low power Bluetooth low energy (BLE) single-mode network processor, compliant with Bluetooth specification v4.0. The BlueNRG can act as master or slave. The entire Bluetooth low energy stack runs on the embedded Cortex M0 core. The non-volatile Flash memory allows on-field stack upgrading. The BlueNRG allows applications to meet the tight advisable peak current requirements imposed by the use of standard coin cell batteries. The maximum peak current is only 10 mA at 1 dBm of output power. Ultra low-power sleep modes and very short transition times between operating modes allow very low average current consumption, resulting in longer battery life. The BlueNRG offers the option of interfacing with external microcontrollers using SPI transport layer.
Key Features
- Bluetooth specification v4.0 compliant, slave single-mode Bluetooth low energy network processor
- Embedded Bluetooth low energy protocol stack: GAP, GATT, SM, L2CAP, LL, RF-PHY
- Bluetooth low energy profiles provided separately
- Operating supply voltage: from 2.0 to 3.6 V
- 8.2 mA maximum TX current (@0 dBm, 3.0 V)
- Down to 1.7 µA current consumption with active BLE stack
- Integrated linear regulator and DC-DC step-down converter
- Up to +8 dBm available output power (at antenna connector)
- Excellent RF link budget (up to 96 dB)
- Accurate RSSI to allow power control
- Proprietary application controller interface (ACI), SPI based, allows interfacing with an external host application microcontroller
- Full link controller and host security
- High performance, ultra-low power Cortex-M0 32-bit based architecture core
- Upgradable BLE stack (stored in embedded Flash memory, via SPI)
- AES security co-processor
- Low power modes
- 16 or 32 MHz crystal oscillator
- 12 MHz ring oscillator
- 32 kHz crystal oscillator
- 32 kHz ring oscillator
- Compliant with the following radio frequency regulations: ETSI EN 300 328, EN 300 440, FCC CFR47 Part 15, ARIB STD-T66
- Available in QFN32 (5 x 5 mm) and WLCSP34 (2.66 x 2.56 mm) packages
- Operating temperature range: -40 °C to 85 °C
Product Specifications
Application Notes
User Manuals
Programming Manuals
Errata Sheets
Design Notes & Tips
STM32 Open Development Environment
| Part Number | Manufacturer | Description |
|---|
| X-NUCLEO-IDB04A1 | ST | Bluetooth low energy expansion board based on BlueNRG for STM32 Nucleo |
Evaluation Tool Software
MCUs Embedded Software
| Part Number | Manufacturer | Description |
|---|
| X-CUBE-BLE1 | ST | Bluetooth Low Energy software expansion for STM32Cube |
MEMS and Sensors Software
| Part Number | Manufacturer | Description |
|---|
| BLUEMICROSYSTEM1 | ST | IoT node with BLE connectivity, environmental and motion sensors, and motion middleware libraries |
Open.RF
| Part Number | Manufacturer | Description |
|---|
| OSXSmartConnPS | ST | Bluetooth low energy profiles for the X-CUBE-BLE1 expansion for STM32Cube |
Wireless Connectivity Software
Solution Evaluation Tools
| Part Number | Manufacturer | Description |
|---|
| STEVAL-IDB002V1 | ST | Bluetooth ® SMART board based on the BlueNRG low energy network processor |
| STEVAL-IDB003V1 | ST | A BlueNRG IC based Bluetooth® Smart USB dongle |
Sample & Buy
| Part Number | Package | Packing Type | Operating Temperature (°C) (min) | Operating Temperature (°C) (max) | Unit Price (US$)
* | Quantity | ECCN (EU) | ECCN (US) | Country of Origin |
|---|
| BLUENRGQTR | VFQFPN32 5X5X0.9 3.6X3.6EP 0.5P | Tape And Reel | -40 | 85 | - | - | 5A002A1A | 5A992C | PHILIPPINES |
| BLUENRGCSP | WLCSP MSL1 | Tape And Reel | -40 | 85 | - | - | 5A002A1A | 5A992C | - |
Quality & Reliability
