HDMI2C1-14HD:ESD protection and signal conditioning for HDMI 2.0 source interface

The HDMI2C1-14HD is a fully integrated ESD protection and signal conditioning device for control links and TMDS data video channels of HDMItransmitters (source).

The HDMI2C1-14HD is a simple solution that provides HDMIdesigners with an easy and fast way to reach full compliance with the stringent HDMI2.0 (4K/2K 60fps) on a wide temperature range.

TM: HDMI: the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Key Features

  • HDMI™ 2.0 (4K/2K 60fps) compliant from -40 to 85 °C
  • TMDS high bandwidth and very low clamping voltage ESD protection
  • 8 kV contact ESD protection on connector side
  • Supports direct connection to low-voltage HDMI™ ASIC and/or CEC driver (down to 1.8 V)
  • DDC capacitive decoupling between ASIC and HDMI™ connector and dynamic pull-up for long cable driving
  • Back drive protection on 5 V, DDC bus and CEC
  • CEC independent structure from main power supply
  • HDMI™ Ethernet and audio return channel (HEAC) compatible
  • HPD pull down and signal conditioning
  • Short-circuit protection on 5 V output
  • Proposed in QFN 36 leads 500 μm pitch
  • Benefits
    • Easy hardware design and speed-up certification of HDMI™ 2.0
    • Pin map sequence compliant with HDMI™ connector type A
    • High integration level for minimal PCB footprint
    • Efficient protection of sensitive HDMI™ ASICs
    • Very low power consumption in stand-by mode
    • Wake-up from stand-by through CEC bus
    • Allow to drive long cable and poor quality cable
    • Companion chip for STMicroelectronics’ STixxxx HDMI™ decoders
  • Complies with the following standards
    • HDMI™ 2.0 version
    • IEC 61000-4-2 level 4
    • JESD22-A114D level 2
Product Specifications
DescriptionVersionSize
DS9259: ESD protection and signal conditioning for HDMI™ 2.0 source interface2.0795 KB
Application Notes
DescriptionVersionSize
AN3353: IEC 61000-4-2 standard testing1.1172 KB
AN4022: TVS short pulse dynamic resistance measurement and correlation with TVS clamping voltage during ESD2.1362 KB
Technical Notes & Articles
DescriptionVersionSize
TN1173: Packing information for IPAD™, protection, rectifiers, thyristors and AC Switches4.0330 KB
Presentations
DescriptionVersionSize
HDMI® IPAD™ product presentation : HDMI signal conditioning1.01 MB
Solution Evaluation Tools
Part NumberManufacturerDescription
STEVAL-CCH003V2STHDMI interface demonstration kit based on the HDMI2C1-14HD (main board plus daughter board)
Sample & Buy
Part NumberQuantityUnit Price (US$) *PackagePacking TypeOperating Temperature (°C) (min)Operating Temperature (°C) (max)ECCN (EU)ECCN (US)Country of Origin
HDMI2C1-14HD100.778QFN-36LTape And Reel-4085NECEAR99PHILIPPINES
Quality & Reliability
Part NumberPackageGradeRoHS Compliance GradeMaterial Declaration**
HDMI2C1-14HDQFN-36LIndustrialEcopack2md_a0l1-wspc-wqfn-mr.65.35.07-050-36l-e_7xa0hdmc1b6-wspc-(hdmi2c1-14hd).pdf
md_a0l1-wspc-wqfn-mr.xml
ESD protection and signal conditioning for HDMI™ 2.0 source interface HDMI2C1-14HD
IEC 61000-4-2 standard testing ESDAXLC6-1BU2
TVS short pulse dynamic resistance measurement and correlation with TVS clamping voltage during ESD ESDAXLC6-1BU2
Packing information for IPAD™, protection, rectifiers, thyristors and AC Switches FLC21
Packing information for IPAD™, protection, rectifiers, thyristors and AC Switches HSP061-4M10
md_a0l1-wspc-wqfn-mr.65.35.07-050-36l-e_7xa0hdmc1b6-wspc-(hdmi2c1-14hd).pdf HDMI2C1-14HD
md_a0l1-wspc-wqfn-mr.xml HDMI2C1-14HD