SPC560PADPT144S:Daughter/adapter board for SPC560 series 512KB/1MB devices in QFP144 package

The SPC560PADPT100S and SPC560PADPT144S are evaluation systems supporting the STMicroelectronics®SPC560Pxx family of automotive microprocessors. The complete system consists of a SPC56XXMB motherboard and a mini module which plugs directly into the motherboard. Different mini modules are available for evaluating the whole family of devices in all supported packages.

The evaluation systems allow full access to the CPU, to all of the CPU’s I/O signals and to the motherboard’s peripherals (such as CAN, SCI and LIN).

The mini modules itself can be used as a stand-alone unit when access to the I/O pins or peripherals is not needed.

Key Features

  • SPC560Pxx modular evaluation system
  • On/off power switch with LED indicators
  • Board power supply: 12 VDC external supply voltage
  • Onboard STMicroelectronics® L9758 voltage regulator with three simultaneous output at 1.2 V, 3.3 V and 5 V
  • Possibility to configure onboard peripherals to operate at 5 V or 3.3 V logic levels, depending on target
  • Up to two CAN channels with jumper enable1
    • One CAN channel with High-Speed transceiver and DB9 male connector
    • One CAN channel with Low-Speed Fault Tolerant and High-Speed transceiver (selectable with jumpers) and DB9 male connector
  • Up to two LIN channels with jumper enable(a)
    • One channel with transceiver and pin header connector populated
    • One channel with footprints only
  • One SCI channel with jumper enables, transceiver and DB9 female connector
  • Up to two FlexRay channels with jumper enables(a)
    • One channel with transceiver and DB9 male connector
    • One channel with footprint only
  • Four user push buttons with jumper enable and polarity selection
  • Four user LED’s with jumper enables
  • One potentiometer for analog voltage input
  • Pin array for accessing all I/O signals
  • Expansion connectors for accessing all I/O signals
  • Prototyping area with 0.1” spacing and SOIC footprint
  • Specifications:
    • Board size 110 mm x 75 mm
    • 12 VDC Center Positive power supply with 2.5/5.5 mm barrel connector
Product Specifications
DescriptionVersionSize
DB1746: SPC560Pxx microcontroller family evaluation board2.054 KB
Application Notes
DescriptionVersionSize
AN4057: SPC560Pxx, SPC56APxx, RPC56APxx power up HW guideline3.0126 KB
Schematic Packs
DescriptionVersionSize
Schematic pack for SPC560PADPT144S1.0695 KB
License Agreement
DescriptionVersionSize
Evaluation products license agreement1.0125 KB
Product Evaluation Tools
Part NumberManufacturerDescription
SPC56XXMBSTEvaluation motherboard for SPC56 series microcontrollers
Sample & Buy
Part NumberUnit Price (US$) *QuantitySpecific featuresECCN (EU)ECCN (US)Country of Origin
SPC560PADPT144S3921-NECEAR99-
Quality & Reliability
Part NumberRoHS Compliance GradeMaterial Declaration**
SPC560PADPT144SEcopack1
SPC560Pxx microcontroller family evaluation board SPC560PADPT100S
SPC560Pxx, SPC56APxx, RPC56APxx power up HW guideline SPC560PADPT100S
SPC560Pxx, SPC56APxx, RPC56APxx power up HW guideline SPC560PADPT144S
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 ST-LINK-V2