SPV1040:High efficiency solar battery charger with embedded MPPT

The SPV1040 device is a low power, low voltage, monolithic step-up converter with an input voltage range from 0.3 V to 5.5 V, capable of maximizing the energy generated by a single solar cell (or fuel cell), where low input voltage handling capability is extremely important. Thanks to the embedded MPPT algorithm, even under varying environmental conditions (such as irradiation, dirt, temperature) the SPV1040 offers maximum efficiency in terms of power harvested from the cells and transferred to the output. The device employs an input voltage regulation loop, which fixes the charging battery voltage via a resistor divider. The maximum output current is set with a current sense resistor according to charging current requirements. The SPV1040 protects itself and other application devices by stopping the PWM switching if either the maximum current threshold (up to 1.8 A) is reached or the maximum temperature limit (up to 155 °C) is exceeded. An additional built-in feature of the SPV1040 is the input source reverse polarity protection, which prevents damage in case of reverse connection of the solar panel at the input.

Key Features

  • 0.3 V to 5.5 V operating input voltage
  • 140 mΩ internal synchronous rectifier
  • 120 mΩ internal power active switch
  • 100 kHz fixed PWM frequency
  • Duty cycle controlled by MPPT algorithm
  • Output voltage regulation, overcurrent and overtemperature protection
  • Input source reverse polarity protection
  • Built-in soft-start
  • Up to 95% efficiency
  • 3 mm x 4.4 mm TSSOP8 package
Product Specifications
DescriptionVersionSize
DS6991: High efficiency solar battery charger with embedded MPPT6.0905 KB
Application Notes
DescriptionVersionSize
AN3319: STEVAL-ISV006V2: solar battery charger using the SPV10408.21 MB
AN4050: STEVAL-ISV012V1: lithium-ion solar battery charger2.01 MB
Design Notes & Tips
DescriptionVersionSize
DN0012: Boost converter with MPPT drives isolated solar panel loads1.1311 KB
Presentations
DescriptionVersionSize
SPV1040: solar battery charger for portable1.0345 KB
Brochures
DescriptionVersionSize
Brochure Power management guide05.20164 MB
Solution Evaluation Tools
Part NumberManufacturerDescription
STEVAL-ISV006V2Up to 5 W solar battery charger with embedded MPPT based on SPV1040
STEVAL-ISV012V1STSolar battery charger for Li-Ion batteries
Sample & Buy
Part NumberPackagePacking TypeOperating Temperature (°C) (min)Operating Temperature (°C) (max)Unit Price (US$) *QuantityECCN (EU)ECCN (US)Country of Origin
SPV1040TTSSOP8Tube-401251.251000NECEAR99PHILIPPINES
SPV1040TTRTSSOP8Tape And Reel-401251.251000NECEAR99PHILIPPINES
Quality & Reliability
Part NumberPackageGradeRoHS Compliance GradeMaterial Declaration**
SPV1040TTSSOP8IndustrialEcopack2md_6p-wspc-tssop-wspc-8-wspc-body-wspc-4.4-wspc-pitch-wspc-0.65_c56pui14aa5-wspc-(spv1040t-spv1040ttr)_a_ver2_signed.pdf
md_6p-wspc-tssop-wspc-8-wspc-body-wspc-4.4-wspc-pitch-wspc-0.65_c56pui14aa5-wspc-(spv1040t-spv1040ttr)_a_ver2.xml
SPV1040TTRTSSOP8IndustrialEcopack2md_6p-wspc-tssop-wspc-8-wspc-body-wspc-4.4-wspc-pitch-wspc-0.65_c56pui14aa5-wspc-(spv1040t-spv1040ttr)_a_ver2_signed.pdf
md_6p-wspc-tssop-wspc-8-wspc-body-wspc-4.4-wspc-pitch-wspc-0.65_c56pui14aa5-wspc-(spv1040t-spv1040ttr)_a_ver2.xml
High efficiency solar battery charger with embedded MPPT SPV1040
circuit_diagram_18080_thumbnail.png SPV1040
STEVAL-ISV006V2: solar battery charger using the SPV1040 STEVAL-ISV006V2
STEVAL-ISV012V1: lithium-ion solar battery charger STEVAL-ISV012V1
Boost converter with MPPT drives isolated solar panel loads L6924U
STEVAL-ISV006V2: solar battery charger using the SPV1040 STEVAL-ISV006V2
Very low drop voltage regulators with inhibit KFXX
md_6p-wspc-tssop-wspc-8-wspc-body-wspc-4.4-wspc-pitch-wspc-0.65_c56pui14aa5-wspc-(spv1040t-spv1040ttr)_a_ver2_signed.pdf SPV1040
md_6p-wspc-tssop-wspc-8-wspc-body-wspc-4.4-wspc-pitch-wspc-0.65_c56pui14aa5-wspc-(spv1040t-spv1040ttr)_a_ver2.xml SPV1040