ST-LINK/V2:ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.

In addition to provide the same functionalities as the ST-LINK/V2, the ST-LINK/V2-ISOL features digital isolation between the PC and the target application board. It also withstands voltages of up to 1000 Vrms.

STM8 applications use the USB full-speed interface to communicate with the ST Visual Develop (STVD) or ST Visual Program (STVP) software.

STM32 applications use the USB full-speed interface to communicate with Atollic®, IAR, Keil®or TASKING integrated development environments.

Key Features

  • 5 V power supplied by a USB connector
  • USB 2.0 full-speed-compatible interface
  • USB standard A to Mini- B cable
  • SWIM specific features
    • 1.65 V to 5.5 V application voltage supported on SWIM interface
    • SWIM low-speed and high-speed modes supported
    • SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
    • SWIM cable for connection to the application via an ERNI standard vertical connector (ref: 284697 or 214017) or horizontal connector (ref: 214012)
    • SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
  • JTAG/serial wire debugging (SWD) specific features:
    • 1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs
    • JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
    • JTAG supported
    • SWD and serial wire viewer (SWV) communication supported
  • Direct firmware update feature supported (DFU)
  • Status LED which blinks during communication with the PC
  • Operating temperature 0 to 50 °C
  • 1000 Vrms high isolation voltage (ST-LINK/V2-ISOL only)
Product Specifications
DescriptionVersionSize
DB1275: ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM324.0201 KB
User Manuals
DescriptionVersionSize
UM1075: ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM327.0658 KB
Bill of Materials
DescriptionVersionSize
ST-LINK/V2 BOMB-0112 KB
ST-LINK/V2-ISOL BOMB-0312 KB
License Agreement
DescriptionVersionSize
Evaluation products license agreement1.0125 KB
Development Tool Software
Part NumberManufacturerDescription
STSW-LINK004STSTM32 ST-LINK utility
STSW-LINK007STST-LINK, ST-LINK/V2, ST-LINK/V2-1 firmware upgrade
STSW-LINK009STST-LINK, ST-LINK/V2, ST-LINK/V2-1 USB driver signed for Windows7, Windows8, Windows10
Sample & Buy
Part NumberGeneral DescriptionSpecific featuresRoHS Compliance GradeUnit Price (US$) *Material DeclarationQuantity
ST-LINK/V2-ISOLST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32With digital isolationEcopack177.18-1
ST-LINK/V2ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32-Ecopack120.83-1
Quality & Reliability
Part NumberPackageGradeRoHS Compliance GradeMaterial Declaration**
ST-LINK/V2-ISOLCARDIndustrialEcopack1
ST-LINK/V2CONTRACTSIndustrialEcopack1
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 ST-LINK-V2
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 ST-LINK-V2
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 ST-LINK-V2
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 ST-LINK-V2
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 ST-LINK-V2