• 简体中文
• English

STBC02：Li-Ion linear battery charger with LDO, load switches and reset generator

The STBC02 is a highly integrated power management, embedding a linear battery charger, a 150 mA LDO, 2 SPDT load switches, a smart reset/watchdog block and a protection circuit module (PCM) to prevent the battery from being damaged under fault conditions.

The STBC02 uses a CC/CV algorithm to charge the battery; the fast charge and the pre-charge current can be both independently programmed using dedicated resistors. The termination current is set by default, being 5% of the programmed fast charge current, but it can also be fixed to different values. Likewise, the battery floating voltage value is programmable and can be set to a value up to 4.45 V.

The STBC02 also features a charger enable input to stop the charging process anytime.

The STBC02 is automatically powered off from the connected battery when the IN pin is not connected to a valid power source (battery mode).

A battery under/overtemperature condition can be detected by using an external circuitry (NTC thermistor).

The STBC02 draws less than 10 nA from the connected battery in shipping mode conditions, so to maximize the battery life during end product shelf life. The device is available in the Flip Chip 30 package.

Key Features

• Charges single-cell Li-Ion batteries with CC/CV algorithm and charge termination
• Fast charge current up to 450 mA
• Pre-charge current from 1 mA to 450 mA
• Adjustable floating voltage up to 4.45 V
• Integrated low quiescent LDO regulator
• Automatic power path management
• Auto-recharge function
• Embedded protection circuit module (PCM) featuring battery overcharge, battery over-discharge and battery overcurrent protections
• Charging timeout to terminate the charging process for safety reasons
• Shipping mode feature allows battery low leakage when over-discharged
• Very low battery leakage in over-discharge and shutdown mode
• Charge/fault status output
• Battery voltage pin to allow external gauging
• Two 3 Ω SPDT load switches
• Reset generator triggered by USB detection
• SWIRE allows the STBC02 functions to be controlled
• Available in Flip Chip 30, 400 um pitch package
• Rugged ±4 kV HBM, ESD protection on the most critical pins

Product Specifications

Selection Guides

Brochures

Sample & Buy

Quality & Reliability