STP24DP05:24-bit constant current LED sink driver with output error detection

The STP24DP05 is a monolithic, low-voltage, low current power 24-bit shift register designed for LED panel displays. The device contains an 8 x 3-bit serial-IN, parallel-OUT shift register that feeds a 8 x 3-bit D-type storage register. In the output stage, twenty four regulated current sources were designed to provide 5-80 mA constant current to drive the LEDs.

The 8 x 3 shift register data flow sequence order can be managed through two dedicated pins.

The STP24DP05 has a dedicated pin to activate the outputs with a sequential delay, that prevents inrush current during output turn-ON.

The device detection circuit checks 3 different conditions that can occur on the output line: short to GND, short to VO, or open line.

The data detection results are loaded in the shift registers and shifted out via the serial line output.

The detection functionality is activated with a dedicated pin or alternatively, through a logic sequence that allows the user to enter or exit detection mode.

Through three external resistors, the user can adjust the output current for each 8-channel group, therefore controlling the light intensity of LEDs.

The STP24DP05 guarantees a 20 V output driving capability, allowing the user to connect more LEDs in series.

The high clock frequency, 25 MHz, makes the device suitable for high data rate transmission.

The 3.3 V of voltage supply is useful for applications that interface any microcontroller from 3.3 V.

Key Features

  • Low-voltage power supply down to 3 V
  • 8 x 3 constant current output channels
  • Adjustable output current through external resistors
  • Short and open output error detection
  • Serial data IN/parallel data OUT
  • Shift register data flow register control
  • Accepts 3.3 V and 5 V micro driver
  • Output current: 5-80 mA
  • 25 MHz clock frequency
  • High thermal efficiency package
Product Specifications
DescriptionVersionSize
DS5828: 24-bit constant current LED sink driver with output error detection5.0773 KB
Application Notes
DescriptionVersionSize
AN3981: LED array drivers1.13 MB
AN2841: LED dimming implemented on STM32™ microcontroller1.5782 KB
Brochures
DescriptionVersionSize
Brochure Power management guide05.20164 MB
Solution Evaluation Tools
Part NumberManufacturerDescription
EVAL59831.5 A step-down switching regulator demonstration board based on the L5983
STEVAL-ILL015V1High brightness RGB LED array with LED error detection based on the STP24DP05 and STM32
Sample & Buy
Part NumberQuantityUnit Price (US$) *PackagePacking TypeOperating Temperature (°C) (min)Operating Temperature (°C) (max)ECCN (EU)ECCN (US)Country of Origin
STP24DP05BTR10000.991TQFP 48 7x7x1.0Tape And Reel--NECEAR99MALAYSIA
Quality & Reliability
Part NumberPackageGradeRoHS Compliance GradeMaterial Declaration**
STP24DP05BTRTQFP 48 7x7x1.0IndustrialEcopack2md_es-wspc-tqfp-wspc-48-wspc-7x7x1.0-wspc-1.0-wspc-exp-wspc-pad-wspc-down_dbesup92j55-wspc-(stp24dp05btr)-wspc-wcp-wspc-ver2_signed.pdf
md_es-wspc-tqfp-wspc-48-wspc-7x7x1.0-wspc-1.0-wspc-exp-wspc-pad-wspc-down_dbesup92j55-wspc-(stp24dp05btr)-wspc-wcp-wspc-ver2.xml
24-bit constant current LED sink driver with output error detection STP24DP05
circuit_diagram_14714_thumbnail.png STP24DP05
LED array drivers STP08CP05
LED dimming implemented on STM32™ microcontroller STEVAL-ILL015V1
Very low drop voltage regulators with inhibit KFXX
md_es-wspc-tqfp-wspc-48-wspc-7x7x1.0-wspc-1.0-wspc-exp-wspc-pad-wspc-down_dbesup92j55-wspc-(stp24dp05btr)-wspc-wcp-wspc-ver2.xml STP24DP05