• 简体中文
• English

VNH3SP30-E：AUTOMOTIVE FULLY INTEGRATED H-BRIDGE MOTOR DRIVER

The VNH3SP30-E is a full-bridge motor driver intended for a wide range of automotive applications. The device incorporates a dual monolithic high-side driver (HSD) and two low-side switches. The HSD switch is designed using STMicroelectronics proprietary VIPower™ M0-3 technology that efficiently integrates a true Power MOSFET with an intelligent signal/protection circuit on the same die.

The low-side switches are vertical MOSFETs manufactured using STMicroelectronics proprietary EHD (“STripFET™”) process.The three circuits are assembled in a MultiPowerSO-30 package on electrically isolated lead frames. This package, specifically designed for the harsh automotive environment, offers improved thermal performance thanks to exposed die pads. Moreover, its fully symmetrical mechanical design provides superior manufacturability at board level. The input signals IN_A and IN_B can directly interface with the microcontroller to select the motor direction and the brake condition. Pins DIAG_A/EN_A or DIAG_B /EN_B, when connected to an external pull-up resistor, enable one leg of the bridge. They also provide a feedback digital diagnostic signal. The normal condition operation is explained in The speed of the motor can be controlled in all possible conditions by the PWM up to kHz. In all cases, a low level state on the PWM pin will turn off both the LS_Aand LS_B switches. When PWM rises to a high level, LS_A or LS_B turn on again depending on the input pin state.

Key Features

• Protection against loss of ground and loss of VCC
• PWM operation up to 10 kHz
• Package: ECOPACK®
• Linear current limiter
• Cross-conduction protection
• Output current: 30A
• Undervoltage and overvoltage shutdown
• 5V logic level compatible inputs
• Thermal shut down
• Very low standby power consumption
• Overvoltage clamp

Product Specifications

Selection Guides

Evaluation Tool Software

Sample & Buy

Quality & Reliability