| TA8050AFG | 1.5A current capacity bidirectional DC motor driver / Four modes: Forward, Reverse, Stop, Break | 20 | Y |
| TA8050FG | 1.5A current capacity bidirectional DC motor driver / Four modes: Forward, Reverse, Stop, Break | 20 | Y |
| TA8083AFG | 0.5A current capacity bidirectional DC motor driver / Two circuits contained (power supply, self-diagnostic, and detection functions provided for each channel) | 20 | Y |
| TA8083FG | 0.5A current capacity bidirectional DC motor driver / Two circuits contained (power supply, self-diagnostic, and detection functions provided for each channel) | 20 | Y |
| TA8083PG | 0.5A current capacity bidirectional DC motor driver / Two circuits contained (power supply, self-diagnostic, and detection functions provided for each channel) | 16 | N |
| TB9000AFG | Low current consumption / Built-in watchdog timer | 16 | Y |
| TB9000CFNG | Built-in watchdog timer | 20 | Y |
| TB9000FG | Low current consumption / Built-in watchdog timer | 16 | Y |
| TB9001FNG | Low current consumption / Built-in 32kHz clock | 20 | Y |
| TB9004FNG | Dual power supply voltages: 5 V plus 3.4 / 2.55 / 1.55 V / Watchdog timer enable/disable | 24 | Y |
| TB9005FNG | 5V Voltage Regulator / Power on Reset&Watchdog Timer | 20 | Y |
| TB9006FG | Dual power supply voltages with integrated power MOSFET:5V+5V / Selectable reset voltage level:4.4V/4.2V | 36 | Y |
| TB9021FNG | | 16 | Y |
| TB9051FTG | | 28 | Y |
| TB9052FNG | DC brushed motor GATE-driver for N-ch MOSFET | 48 | Y |
| TB9056FNG | Data communications with LIN (slave) / Bidirectional DC motor driver: 1 channel | 24 | Y |
| TB9057FG | DC brushed motor GATE-driver for N-ch MOSFET / Motor Speed control by PWM Input | 48 | Y |
| TB9060FNG | 3-phase full-wave sensorless drive / PWM control (PWM signal is applied externally) | 24 | Y |
| TB9061AFNG | 3-phase full-wave sensorless drive / Suited for both PWM input and DC input control | 24 | Y |
| TB9061FNG | 3-phase full-wave sensorless drive / Suited for both PWM input and DC input control | 24 | Y |
| TB9065FG | Charge-pump brushless pre-driver / LIN transceiver | 64 | Y |
| TB9067FNG | 120 degree commutation logic / Pre-drivers for a high-side P-ch FET and a low-side N-ch FET | 24 | Y |
| TB9068FG | Motor driver P-ch RDSON: 1ohm(typ.), N-ch RDSON: 1ohm(typ.) / 120 degree commutation logic, LIN 1.3 based transceiver | 48 | Y |
| TB9080FG | 3-phase brushless pre-driver / Built-in control logic that output is sine wave drive (operate sine wave drive without MCU) | 64 | Y |
| TB9081FG | 3-phase brushless pre-driver | 64 | Y |
| TB9101FNG | Build-in 2-ch H-Bridge driver / Multi protection: two circuits contained (short-circuit, overheat, overvoltage and lowvoltage detection) | 24 | Y |
| TB9102FNG | Build-in 6-ch H-Bridge driver / SPI interface (16-bit shift register, CLK, CSB) | 24 | Y |
| TB9110FNG | DC brushed motor GATE-driver for N-ch MOSFET / Motor Speed control by PWM Input | 24 | Y |
| TB9150FNG | | 48 | Y |
