MC10H123: Triple 4-3-3-Input Bus Driver
The MC10H123 is a triple 4-3-3-Input Bus Driver. The MC10H123 consists of three NOR gates designed for bus driving applications on card or between cards. Output low logic levels are specified with VOL = -2.1 Vdc so that the bus may be terminated to -2.0 Vdc. The gate output, when low, appears as a high impedance to the bus, because the output emitter-followers of the MC10H123 are "turned-off." This eliminates discontinuities in the characteristic impedance of the bus. The VOH level is specified when driving a 25-ohm load terminated to -2.0 Vdc, the equivalent of a 50-ohm bus terminated at both ends. Although 25 ohms is the lowest characteristic impedance that can be driven by the MC10H123, higher impedance values may be used with this part. A typical 50-ohm bus is shown in Figure 1.
特性- Propagation Delay, 1.5 ns Typical
- Improved Noise Margin 150 mV (Over Operating Voltage and Temperature Range)
- Voltage Compensated
- MECL 10K-Compatible
- Pb-Free Packages are Available
|
应用注释 (10)
封装图纸 (2)
数据表 (1)
产品订购型号
| 产品 | 状况 | Compliance | 封装 | MSL* | 容器 | 预算价格 (1千个数量的单价） |
|---|
| MC10H123FNG | Active | Pb-free
Halide free | PLLC-20 | 775-02 | 3 | Tube | 46 | 联系BDTIC |
| MC10H123FNR2G | Active | Pb-free
Halide free | PLLC-20 | 775-02 | 3 | Tape and Reel | 500 | 联系BDTIC |
| MC10H123PG | Last Shipments | Pb-free
Halide free | PDIP-16 | 648-08 | NA | Tube | 25 | |
订购产品技术参数
| Product | Type | Channels | Input / Output Ratio | Input Level | Output Level | VCC Typ (V) | tJitterRMS Typ (ps) | tskew(o-o) Max (ps) | tpd Typ (ns) | tR & tF Max (ps) | fmaxClock Typ (MHz) | fmaxData Typ (Mbps) |
|---|
| MC10H123FNG | Signal Driver | 3 | 4:1 | ECL | ECL | -5.2 | | | 1.15 | 1600 | | |
| MC10H123FNR2G | Signal Driver | 3 | 4:1 | ECL | ECL | -5.2 | | | 1.15 | 1600 | | |
