汽车级 ST72321BLJ6 8位MCU为汽车的32KB Flash,10位ADC,5计时器及SPI,ADC,SCI,I²C接口LQFP-44封装
The ST72321BLJ6-Auto device is a member of the ST7 microcontroller family designed for
mid-range automotive applications running at 3.3V.
All devices are based on a common industry-standard 8-bit core, featuring an enhanced
instruction set and are available with Flash memory. The ST7 family architecture offers both
power and flexibility to software developers, enabling the design of highly efficient and
compact application code.
The on-chip peripherals include an A/D converter, a PWM autoreload timer, two general
purpose timers, SPI, SCI and I²C interface.
For power economy, the microcontroller can switch dynamically into wait, slow, active halt or
halt mode when the application is in idle or standby state.
Typical applications include:
● All types of car body applications such as window lift, DC motor control and rain
sensors
● Safety microcontrollers in airbag and engine management applications
● Auxiliary functions in car radios
Device |
Program memory |
RAM (stack) |
Oper. voltage |
Temp. range |
Package |
ST72321BLJ6
Automotive |
Flash 32 Kbytes |
1024 (256) bytes |
3.0 to 3.6V |
-40 to +85°C |
LQFP44 10x10 |
ST72321BLJ6 订购型号:
Order code |
Package |
Flash memory (Kbytes) |
Temperature range |
ST72F321BLJ6TARE |
LQFP44 |
32 |
-40°C to +85°C |
ST72321BLJ6 产品特点
- Memories
—32 Kbyte dual voltage high density Flash
(HDFlash) with readout protection capability
(in-application programming and in-circuit
programming for HDFlash devices)
—512 bytes to 1 Kbyte RAM
—HDFlash endurance: 100 cycles, data retention
20 years
- Clock, reset and supply management
—Clock sources: Crystal/ceramic resonator
oscillators, internal RC oscillator and bypass
for external clock
—PLL for 2x frequency multiplication
—4 power saving modes: Halt, active halt, wait
and slow
- Interrupt management
—Nested interrupt controller
—10 interrupt vectors plus TRAP and reset
—9/6 external interrupt lines (on 4 vectors)
- Up to 32 I/O ports
—32/24 multifunctional bidirectional I/O lines
—22/17 alternate function lines
—12/10 high sink outputs
- 5 timers
—Main clock controller with real-time base, beep
and clock-out capabilities
—Configurable watchdog timer
—16-bit timer A with 1 input capture, 1 output
compare, external clock input, PWM and pulse
generator modes
—16-bit timer B with 2 input captures, 2 output
compares, PWM and pulse generator modes
—8-bit PWM auto-reload timer with 2 input
captures, 4 PWM outputs, output compare and
time base interrupt, external clock with event
detector
- 3 communication interfaces
—SPI synchronous serial interface
—SCI asynchronous serial interface
—I²C multimaster interface
- 1 analog peripheral (low current coupling)
—10-bit ADC with up to 12 robust input ports
- Instruction set
—8-bit data manipulation
—63 basic instructions
—17 main addressing modes
—8 x 8 unsigned multiply instruction
- Development tools
—Full HW/SW development package
—In-circuit testing capability
ST72321BLJ6 技术支持与电子电路设计开发资源下载
- ST 意法8位汽车微控制器ST7系列ST72321BLJ6 数据手册 DataSheet 下载.pdf
- ST 意法微控制器选型指南.pdf
- 相关产品选型( Excel 文档格式)
- 先进半导体解决方案的门电子. PDF
- 意法半导体应用支持. PDF
- 参考指南. PDF
- 周围半导体机顶盒应用. PDF
- 汽车的8位闪存微控制器. PDF
- STM8S MCU系列8位微控制器. PDF
- 8 ,16和32位微控制器产品和工具选择指南. PDF
- 电机控制选型指南. PDF