汽车级 ST7L15 8位MCU用于汽车的单电压闪存/ROM内存,数据EEPROM,ADC,5定时器的SPI SO20封装
The ST7L1x is a member of the ST7 microcontroller family suitable for automotive applications. All ST7 devices are based on a common industry-standard 8-bit core, featuring an enhanced instruction set.
The ST7L1 features Flash memory with byte-by-byte in-circuit programming (ICP) and inapplication programming (IAP) capability.
Under software control, the ST7L1 device can be placed in wait, slow or halt mode, reducing power consumption when the application is in idle or standby state.
The enhanced instruction set and addressing modes of the ST7 offer both power and flexibility to software developers, enabling the design of highly efficient and compact application code. In addition to standard 8-bit data management, all ST7 microcontrollers feature true bit manipulation, 8x8 unsigned multiplication and indirect addressing modes.
| Features | ST7L15 | ST7L19 | ||
| Program memory - bytes | 4 Kbytes Flash | |||
| RAM (stack) - bytes | 256 bytes (128 bytes) | |||
| Data EEPROM | 128 bytes | |||
| Peripherals | Lite timer with watchdog, autoreload timer, SPI, 10-bit ADC | |||
| Operating Supply | 3.0 to 5.5V | |||
| CPU Frequency | Up to 8 MHz (w/ext OSC up to 16 MHz and int 1 MHz RC 1%, PLLx8/4 MHz) | |||
| Operating Temperature | Up to -40 to +85°C, -40 to +105°C | |||
| Packages | SO20 150mil | |||
ST7L15 订购型号:
| Order code | Program memory (bytes) |
RAM (bytes) |
Data EEPROM (bytes) |
Temperature range |
Package |
| ST7FL15F1MAE | 4 K Flash | 256 | ? | -40 to +85°C | SO20 |
| ST7FL19F1MAE | 128 | ||||
| ST7FL15F1MCE | ? | -40 to +125°C | |||
| ST7FL19F1MCE | 128 |
ST7L15 产品特点
- Memories
– 4 Kbytes program memory: Single voltage extended Flash (XFlash) or ROM with readout protection capability. In-application programming and in-circuit programming(IAP and ICP) for XFlash devices
– 256 bytes RAM
– 128 bytes data EEPROM (XFlash and ROM devices) with readout protection,300 K write/erase cycles guaranteed
– XFlash and EEPROM data retention 20 years at 55°C - Clock, reset and supply management
– Enhanced reset system
– Enhanced low voltage supervisor (LVD) for main supply
– Clock sources: Internal 1% RC oscillator,crystal/ceramic resonator or external clock
– Optional x4 or x8 PLL for 4 or 8 MHz internal clock (x4 PLL only available for Flash devices)
– 5 power saving modes: Halt, active halt, auto wakeup from halt, wait and slow - I/O ports
– Up to 17 multifunctional bidirectional I/O lines
– 7 high sink outputs - 5 timers
– Configurable watchdog timer
– Two 8-bit lite timers with prescaler, 1 realtime base and 1 input capture
– Two 12-bit autoreload timers with 4 PWM outputs, 1 input capture, 1 pulse and 4 output compare functions - Communication interface
– SPI synchronous serial interface - Interrupt management
– 12 interrupt vectors plus TRAP and reset
– 15 external interrupt lines (on 4 vectors) - A/D converter
– 7 input channels
– 10-bit precision - Instruction set
– 8-bit data manipulation
– 63 basic instructions with illegal opcode detection
– 17 main addressing modes
– 8 x 8 unsigned multiply instructions - Development tools
– Full hardware/software development package
– DM (debug module)
ST7L15 技术支持与电子电路设计开发资源下载
- ST 意法8位汽车微控制器ST7L15 数据手册 DataSheet 下载.pdf
- ST 意法微控制器选型指南.pdf
- 相关产品选型(
Excel 文档格式) - 先进半导体解决方案的门电子. PDF
- 意法半导体应用支持. PDF
- 参考指南. PDF
- 周围半导体机顶盒应用. PDF
- 汽车的8位闪存微控制器. PDF
- STM8S MCU系列8位微控制器. PDF
- 8 ,16和32位微控制器产品和工具选择指南. PDF
- 电机控制选型指南. PDF
