The 'ABT16470 are 16-bit registered transceivers that contain two sets of D-type flip-flops for temporary storage of data flowing in either direction. The 'ABT16470 can be used as two 8-bit transceivers or one 16-bit transceiver. Separate clock (CLKAB or CLKBA) and output-enable (OEAB\ or OEBA\) inputs are provided for each register to permit independent control in either direction of data flow.
To avoid false clocking of the flip-flops, clock enable (CLKEN\) should not be switched from high to low while CLK is high.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver
| SN74ABT16470 | |
| Voltage Nodes(V) | 5 |
| Vcc range(V) | 4.5 to 5.5 |
| Input Level | TTL |
| Output Level | TTL |
| No. of Outputs | 16 |
| Static Current | 18.5 |
| Technology Family | ABT |
| Rating | Catalog |
| 器件 | 状态 | 温度 | 价格（美元） | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| SN74ABT16470DL | ACTIVE | -40 to 85 | 10.78 | 1ku | SSOP (DL) | 56 | 20 | TUBE | ABT16470 |
| SN74ABT16470DLR | ACTIVE | -40 to 85 | 10.78 | 1ku | SSOP (DL) | 56 | 1000 | LARGE T&R | ABT16470 |
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| SN74ABT16470DL | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT16470DL | SN74ABT16470DL |
| SN74ABT16470DLR | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT16470DLR | SN74ABT16470DLR |
