This octal buffer and line driver is designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. Together with the SN54ABT240, SN74ABT240A, SN54ABT241, and SN74ABT241A, these devices provide the choice of selected combinations of inverting and noninverting outputs, symmetrical active-low output-enable (OE) inputs, and complementary OE and OE inputs.
The SN74ABT244A is organized as two 4-bit buffers/line drivers with separate OE inputs. When OE is low, the device passes noninverted data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver
| SN74ABT244A-EP | |
| Voltage Nodes (V) | 5 |
| Vcc range (V) | 4.5 to 5.5 |
| Logic | True |
| Input Level | TTL |
| Output Level | TTL |
| Output Drive (mA) | -24/48 |
| No. of Outputs | 8 |
| Rating | HiRel Enhanced Product |
| Technology Family | ABT |
| 器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| SN74ABT244AMDBREP | ACTIVE | -55 to 125 | 1.40 | 1ku | SSOP (DB) | 20 | 2000 | LARGE T&R | |
| V62/06667-01XE | ACTIVE | -55 to 125 | 1.40 | 1ku | SSOP (DB) | 20 | 2000 | LARGE T&R |
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| SN74ABT244AMDBREP | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT244AMDBREP | SN74ABT244AMDBREP |
| V62/06667-01XE | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | V62/06667-01XE | V62/06667-01XE |