This octal bus transceiver is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\ input can be used to disable the device so the buses are effectively isolated.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
This device is fully specified for hot-insertion applications using Ioff and power-up 3-state. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down
| SN74ABT245B-EP | |
| Voltage Nodes (V) | 5 |
| Vcc range (V) | 4.5 to 5.5 |
| Input Level | TTL |
| Output Level | TTL |
| Output Drive (mA) | -24/32 |
| No. of Outputs | 8 |
| Logic | True |
| Static Current | 30 |
| tpd max (ns) | 3.5 |
| Rating | HiRel Enhanced Product |
| Technology Family | ABT |
| 器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| SN74ABT245BMDBREP | ACTIVE | -55 to 125 | 0.50 | 1ku | SSOP (DB) | 20 | 2000 | LARGE T&R | |
| V62/04738-01XE | ACTIVE | -55 to 125 | 0.50 | 1ku | SSOP (DB) | 20 | 2000 | LARGE T&R |
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| SN74ABT245BMDBREP | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT245BMDBREP | SN74ABT245BMDBREP |
| V62/04738-01XE | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | V62/04738-01XE | V62/04738-01XE |