This octal bus transceiver is designed for 1.65-V to 3.6-V VCC operation.
The SN74LVC245A is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE\) input can be used to disable the device so the buses are effectively isolated.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of this device as a translator in a mixed 3
| SN74LVC245A-EP | |
| Voltage Nodes (V) | 3.3, 2.7, 2.5, 1.8 |
| Vcc range (V) | 1.65 to 3.6 |
| Input Level | TTL/CMOS |
| Output Level | LVTTL |
| Output Drive (mA) | -24/24 |
| No. of Outputs | 8 |
| Logic | True |
| Static Current | 0.001 |
| tpd max (ns) | 6.1 |
| Rating | HiRel Enhanced Product |
| Technology Family | LVC |
| 器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| SN74LVC245AIPWREP | ACTIVE | -40 to 85 | 0.34 | 1ku | TSSOP (PW) | 20 | 2000 | LARGE T&R | |
| V62/04737-01XE | ACTIVE | -40 to 85 | 0.34 | 1ku | TSSOP (PW) | 20 | 2000 | LARGE T&R |
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| SN74LVC245AIPWREP | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LVC245AIPWREP | SN74LVC245AIPWREP |
| V62/04737-01XE | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | V62/04737-01XE | V62/04737-01XE |