DRV8830 具有电压调节的 1A 低电压刷式直流电机驱动器(I2C 控制器)
The DRV8830 provides an integrated motor driver solution for battery-powered toys, printers, and other low-voltage or battery-powered motion control applications. The device has one H-bridge driver, and can drive one DC motor or one winding of a stepper motor, as well as other loads like solenoids. The output driver block consists of N-channel and P-channel power MOSFET’s configured as an H-bridge to drive the motor winding.
Provided with sufficient PCB heatsinking, the DRV8830 can supply up to 1-A of continuous output current. It operates on power supply voltages from 2.75 V to 6 V.
To maintain constant motor speed over varying battery voltages while maintaining long battery life, a PWM voltage regulation method is provided
|
DRV8830 |
DRV8832 |
DRV8833 |
Vs (Min) (V) |
2.75 |
2.75 |
2.7 |
Vs (Max) (V) |
6 |
6 |
10.8 |
RMS Output Current (A) |
1 |
1 |
1.5 |
# of half-bridges |
2 |
2 |
4 |
Control I/F |
SERIAL |
PWM |
PWM |
Additional Features |
VOLTAGE REGULATION, I2C I/F |
VOLTAGE REGULATION |
|
Peak Output Current (A) |
1 |
1 |
2.0 |
rDS(on) (Ohms) |
0.45 |
0.45 |
|
DRV8830 特性
- H-Bridge Voltage-Controlled Motor Driver
- Drives DC Motor, One Winding of a Stepper Motor, or Other Actuators/Loads
- Efficient PWM Voltage Control for Constant Motor Speed With Varying Supply Voltages
- Low MOSFET On-Resistance: HS + LS 450 mΩ
- 1-A Maximum Continuous Drive Current
- 2.75-V to 6-V Operating Supply Voltage Range
- 300-nA (Typical) Sleep Mode Current Serial I2C-Compatible Interface
- Multiple Address Selections Allow Up to 9 Devices on One I2C Bus
- Current Limit Circuit and Fault Output
- Thermally Enhanced Surface Mount Packages
- APPLICATIONS
- Battery-Powered:
- Printers
- Toys
- Robotics
- Cameras
- Phones
Small Actuators, Pumps, e
DRV8830 芯片订购指南
DRV8830 质量与无铅数据
器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
DRV8830DGQ |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-2-260C-1 YEAR |
DRV8830DGQ |
DRV8830DGQ |
DRV8830DGQR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-2-260C-1 YEAR |
DRV8830DGQR |
DRV8830DGQR |
DRV8830 应用技术支持与电子电路设计开发资源下载
- DRV8830 数据资料 dataSheet 下载.PDF
- TI 德州仪器电机驱动器产品选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 高速数据转换 (PDF 1967 KB)
- 使您的仪器放大器设计达到最佳效果 (zhct011.PDF, 897 KB)
- 低成本电流并联监视器 IC 使动圈式仪表设计复兴 (zhct030.PDF, 1.04 MB)
- Demystifying the Operational Transconductance Amplifier (sboa117.HTM, 8 KB)
- TI 工业自动电机控制/驱动器解决方案 2011 (Rev. B) (PDF 1322 KB)
- 在 PSPICE 中使用德州仪器 (TI) SPICE 模型 (zhca088.HTM, 8 KB)
- PowerPAD™ Thermally Enhanced Package (slma002g.HTM, 8 KB)
- 运算放大器的单电源操作 (PDF 2174 KB)
- Tuning in Amplifiers (PDF 44 KB)
- Op Amp Performance Analysis (PDF 76 KB)
- An Error Analysis of the ISO102 in a Small Signal Measuring Application (PDF 29 KB)
- Level Shifting Signals with Differential Amplifiers (PDF 23 KB)
- Operational Amplifier Macromodels: A Comparison (PDF 59 KB)
DRV8830 工具与软件