TLC7135CDWG4 4.5 位,0.003kSPS ADC,混合 BCD 输出,真差动输入,单通道SOIC-28封装

TLC7135
Resolution(Bits) 14
Sample Rate (max) 3kSPS
Architecture Dual-Slope
Power Consumption(Typ)(mW) 5
DNL(Max)(+/-LSB) 0.01
INL(Max)(+/-LSB) 0.5
No. of Supplies 2
Analog Voltage AV/DD(Min)(V) 4.75
Analog Voltage AV/DD(Max)(V) 5.25
Logic Voltage DV/DD(Min)(V) 4.75
Logic Voltage DV/DD(Max)(V) 5.25
Input Configuration Range +/-Vref
Reference Mode Ext
Rating Catalog
Pin/Package 28PDIP, 28SOIC
Comments Resolution 4.5 Digit BCD
# Input Channels 1
Operating Temp Range(Celsius) 0 to 70 

The ICL7135C and TLC7135C converters are manufactured with Texas Instruments highly efficient CMOS technology. These 4 1/2-digit, dual-slope-integrating, analog-to-digital converters (ADCs) are designed to provide interfaces to both a microprocessor and a visual display. The digit-drive outputs D1 through D4 and multiplexed binary-coded-decimal outputs B1, B2, B4, and B8 provide an interface for LED or LCD decoder/drivers as well as microprocessors.

The ICL7135C and TLC7135C offer 50-ppm (one part in 20,000) resolution with a maximum linearity error of one count. The zero error is less than 10 µV and zero drift is less than 0.5 µV/°C. Source-impedance errors are minimized by low input current (less than 10 pA).

TLC7135CDWG4 特性
TLC7135CDWG4 芯片订购指南
器件 状态 温度 (oC) 价格(美元) 封装 | 引脚
TLC7135CDW ACTIVE 0 to 70 2.15 | 1ku SOIC (DW) | 28
TLC7135CDWG4 ACTIVE 0 to 70 2.15 | 1ku SOIC (DW) | 28
TLC7135CDWR ACTIVE 1.95 | 1ku SOIC (DW) | 28
TLC7135CDWRG4 ACTIVE 1.95 | 1ku SOIC (DW) | 28
TLC7135CN ACTIVE 1.95 | 1ku PDIP (N) | 28
TLC7135CNG4 ACTIVE 1.95 | 1ku PDIP (N) | 28
TLC7135CDWG4 应用技术支持与电子电路设计开发资源下载
  1. TLC7135CDWG4 数据资料 dataSheet 下载.PDF
  2. TI 德州仪器仪ADC 模数转换器产品选型与价格 . xls