TLK2201A 1.0 至 1.6Gbps 千兆以太网收发器

The TLK2201A and TLK2201AI gigabit ethernet transceivers provide for ultrahigh-speed full-duplex point-to-point data transmissions. These devices are based on the timing requirements of the 10-bit interface specification by the IEEE 802.3 Gigabit Ethernet specification. The TLK2201A supports data rates from 1.0 Gbps through 1.6 Gbps and the TLK2201AI supports data rates from 1.2 Gbps through 1.6 Gbps.

The primary application of these devices is to provide building blocks for point-to-point baseband data transmission over controlled impedance media of 50 . The transmission media can be printed-circuit board traces, copper cables or fiber-optical media. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment

TLK2201A
Gbps per Serial Channel(Min) 0.6  
Gbps per Serial Channel(Max) 1.3  
ICC(Max)(mA) 111  
IIH(Max)(uA) 40  
IIL(Max)(uA) -40  
Power Consumption(Nom)(mW) 200  
Number of Serial Channels 1  
Parallel Bus Width 10  
Parallel I/F LVTTL  
Serial I/F LVPECL  
Operating Temperature Range(C) 0 to 70  
Pin/Package 64HVQFP  
VCC(Min)(V) 2.3  
VCC(Max)(V) 2.7  
VCC(Nom)(V) 2.5  
VIH(Min)(V) 2  
VIH(Max)(V) 3.6  
VIL(Max)(V) 0.8
TLK2201A 特性
TLK2201A 芯片订购指南
器件 状态 温度 价格 封装 | 引脚 封装数量 | 封装载体 丝印标记
TLK2201ARCP ACTIVE 0 to 70 4.50 | 1ku HVQFP (RCP) | 64 160 | JEDEC TRAY (10+1)  
TLK2201ARCPG4 ACTIVE 0 to 70 4.50 | 1ku HVQFP (RCP) | 64 160 | JEDEC TRAY (10+1)  
TLK2201ARCPR ACTIVE 0 to 70 3.75 | 1ku HVQFP (RCP) | 64 1000 | LARGE T&R  
TLK2201ARCPRG4 ACTIVE 0 to 70 3.75 | 1ku HVQFP (RCP) | 64 1000 | LARGE T&R  
TLK2201A 质量与无铅数据
器件 环保计划* 铅/焊球涂层 MSL 等级/回流焊峰 环保信息与无铅 (Pb-free) DPPM / MTBF / FIT 率
TLK2201ARCP Green (RoHS & no Sb/Br)  CU NIPDAU  Level-3-260C-168 HR TLK2201ARCP TLK2201ARCP
TLK2201ARCPG4 Green (RoHS & no Sb/Br)  CU NIPDAU  Level-3-260C-168 HR TLK2201ARCPG4 TLK2201ARCPG4
TLK2201ARCPR Green (RoHS & no Sb/Br)  CU NIPDAU  Level-3-260C-168 HR TLK2201ARCPR TLK2201ARCPR
TLK2201ARCPRG4 Green (RoHS & no Sb/Br)  CU NIPDAU  Level-3-260C-168 HR TLK2201ARCPRG4 TLK2201ARCPRG4
TLK2201A 应用技术支持与电子电路设计开发资源下载
  1. TLK2201A 数据资料 dataSheet 下载.PDF
  2. TI 德州仪器串行器和解串器选型与价格 . xls
  3. 所选封装材料的热学和电学性质 (PDF 645 KB)
  4. 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
  5. 高性能SERDES及其在CPRI 接口的应用分析 (zhca076.HTM, 8 KB)
  6. 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
  7. 接口选择指南 (Rev. D) (PDF 2994 KB)
  8. Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
  9. Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
  10. Isolated RS-485 Reference Design (PDF 80 KB)
  11. 无铅组件涂层的保存期评估 (PDF 1305 KB)
  12. Analog Signal Chain Guide (8.62 MB)
  13. Industrial Interface IC Solutions (101 KB)
TLK2201A 工具和软件
培训内容 型号 软件/工具类型
TLK2201A 评估模块 TLK2201AEVM 开发电路板/EVM
TLK2201A 评估模块 TLK2201AEVM-001 开发电路板/EVM
TLK2201A 评估模块 TLK2201AEVM-003 开发电路板/EVM