TNETE2201B 1.25 千兆以太网收发器

The TNETE2201B gigabit Ethernet transceiver provides for ultra high-speed bidirectional point-to-point data transmission. This device is based on the timing requirements of the proposed 10-bit interface specification by the P802.3z Gigabit Task Force.

The intended application of this device is to provide building blocks for developing point-to-point baseband data transmission over controlled-impedance media of approximately 50 . The transmission media can be printed-circuit board traces, back planes, cables, or fiber optical media. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

The TNETE2201B performs the data serialization and deserialization (SERDES) functions for the gigabit ethernet physical layer interface

TNETE2201B
Gbps per Serial Channel(Min) 1.25  
Gbps per Serial Channel(Max) 1.25  
ICC(Max)(mA) 260  
IIH(Max)(uA) 900  
IIL(Max)(uA) -900  
Power Consumption(Nom)(mW) 594  
Number of Serial Channels 4  
Parallel Bus Width 10  
Parallel I/F LVTTL  
Serial I/F LVPECL  
Operating Temperature Range(C) 0 to 70  
Pin/Package 64HTQFP  
VCC(Min)(V) 3.14  
VCC(Max)(V) 3.47  
VCC(Nom)(V) 3.3  
VIH(Min)(V) 2  
VIH(Max)(V) 5.5  
VIL(Max)(V) 0.8
TNETE2201B 特性
TNETE2201B 芯片订购指南
器件 状态 温度 价格 封装 | 引脚 封装数量 | 封装载体 丝印标记
TNETE2201BPHD ACTIVE 0 to 70 4.50 | 1ku HTQFP (PHD) | 64 90 | EIAJ TRAY (10+1)  
TNETE2201BPHDG4 ACTIVE 0 to 70 4.50 | 1ku HTQFP (PHD) | 64 90 | EIAJ TRAY (10+1)  
TNETE2201BPJD ACTIVE 0 to 70 4.50 | 1ku HTQFP (PJD) | 64 160 | JEDEC TRAY (10+1)  
TNETE2201BPJDG4 ACTIVE 0 to 70 4.50 | 1ku HTQFP (PJD) | 64 160 | JEDEC TRAY (10+1)  
TNETE2201BPJDR ACTIVE   3.75 | 1ku HTQFP (PJD) | 64 1000 | LARGE T&R  
TNETE2201BPJDRG4 ACTIVE   3.75 | 1ku HTQFP (PJD) | 64 1000 | LARGE T&R  
TNETE2201BPJW ACTIVE 0 to 70 4.50 | 1ku HTQFP (PJW) | 64 160 | JEDEC TRAY (10+1)  
TNETE2201BPJWG4 ACTIVE 0 to 70 4.50 | 1ku HTQFP (PJW) | 64 160 | JEDEC TRAY (10+1)  
TNETE2201BPJWR ACTIVE 0 to 70 3.75 | 1ku HTQFP (PJW) | 64 1000 | LARGE T&R  
TNETE2201BPJWRG4 ACTIVE 0 to 70 3.75 | 1ku HTQFP (PJW) | 64 1000 | LARGE T&R  
TNETE2201B 质量与无铅数据
器件 环保计划* 铅/焊球涂层 MSL 等级/回流焊峰 环保信息与无铅 (Pb-free) DPPM / MTBF / FIT 率
TNETE2201BPHD Green (RoHS & no Sb/Br)  CU NIPDAU  Level-3-260C-168 HR TNETE2201BPHD TNETE2201BPHD
TNETE2201BPHDG4 Green (RoHS & no Sb/Br)  CU NIPDAU  Level-3-260C-168 HR TNETE2201BPHDG4 TNETE2201BPHDG4
TNETE2201BPJD Green (RoHS & no Sb/Br)  CU NIPDAU  Level-3-260C-168 HR TNETE2201BPJD TNETE2201BPJD
TNETE2201BPJDG4 Green (RoHS & no Sb/Br)  CU NIPDAU  Level-3-260C-168 HR TNETE2201BPJDG4 TNETE2201BPJDG4
TNETE2201BPJDR Green (RoHS & no Sb/Br)  CU NIPDAU  Level-3-260C-168 HR TNETE2201BPJDR TNETE2201BPJDR
TNETE2201BPJDRG4 Green (RoHS & no Sb/Br)  CU NIPDAU  Level-3-260C-168 HR TNETE2201BPJDRG4 TNETE2201BPJDRG4
TNETE2201BPJW Green (RoHS & no Sb/Br)  CU NIPDAU  Level-3-260C-168 HR TNETE2201BPJW TNETE2201BPJW
TNETE2201BPJWG4 Green (RoHS & no Sb/Br)  CU NIPDAU  Level-3-260C-168 HR TNETE2201BPJWG4 TNETE2201BPJWG4
TNETE2201BPJWR Green (RoHS & no Sb/Br)  CU NIPDAU  Level-3-260C-168 HR TNETE2201BPJWR TNETE2201BPJWR
TNETE2201BPJWRG4 Green (RoHS & no Sb/Br)  CU NIPDAU  Level-3-260C-168 HR TNETE2201BPJWRG4 TNETE2201BPJWRG4
TNETE2201B 应用技术支持与电子电路设计开发资源下载
  1. TNETE2201B 数据资料 dataSheet 下载.PDF
  2. TI 德州仪器串行器和解串器选型与价格 . xls
  3. 所选封装材料的热学和电学性质 (PDF 645 KB)
  4. 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
  5. 高性能SERDES及其在CPRI 接口的应用分析 (zhca076.HTM, 8 KB)
  6. 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
  7. 接口选择指南 (Rev. D) (PDF 2994 KB)
  8. Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
  9. Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
  10. Isolated RS-485 Reference Design (PDF 80 KB)
  11. 无铅组件涂层的保存期评估 (PDF 1305 KB)
  12. Analog Signal Chain Guide (8.62 MB)
  13. Industrial Interface IC Solutions (101 KB)
TNETE2201B 工具和软件
培训内容 型号 软件/工具类型
TNETE2201B 评估模块 TNETE2201BEVM 开发电路板/EVM
TNETE2201B 评估模块 TNETE2201BEVM-156 开发电路板/EVM
TNETE2201B 评估模块 TNETE2201BEVM-257 开发电路板/EVM