STM8L151K3 Ultra-low-power 8-bit MCU with 8 Kbytes Flash, 16 MHz CPU, integrated EEPROM
The Low density STM8L15xxx Ultralow power devices feature an enhanced STM8 CPU core providing increased processing power (up to 16 MIPS at 16 MHz) while maintaining the advantages of a CISC architecture with improved code density, a 24-bit linear addressing space and an optimized architecture for low power operations.
The family includes an integrated debug module with a hardware interface (SWIM) which allows non-intrusive in-application debugging and ultrafast Flash programming.
All Low density STM8L15xxx microcontrollers feature embedded data EEPROM and low power low-voltage single-supply program Flash memory.
The devices incorporate an extensive range of enhanced I/Os and peripherals, a 12-bit ADC, two comparators, a real-time clock, two 16-bit timers, one 8-bit timer, as well as standard communication interfaces such as an SPI, an I²C interface, and one USART. The modular design of the peripheral set allows the same peripherals to be found in different ST microcontroller families including 32-bit families. This makes any transition to a different family very easy, and simplified even more by the use of a common set of development tools
技术特性
- Operating conditions
- Operating power supply: 1.65 to 3.6 V (without BOR), 1.8 to 3.6 V (with BOR)
- Temperature range: -40 to 85 or 125 °C
- Low power features
- 5 low power modes: Wait, Low power run, Low power wait, Active-halt with RTC, Halt
- Ultralow leakage per I/0: 50 nA
- Fast wakeup from Halt: 5 μs
- Advanced STM8 core
- Harvard architecture and 3-stage pipeline
- Max freq: 16 MHz, 16 CISC MIPS peak
- Up to 40 external interrupt sources
- Reset and supply management
- Low power, ultrasafe BOR reset with 5 selectable thresholds
- Programmable voltage detector (PVD)
- Clock management
- 32 kHz and 1-16 MHz crystal oscillators
- Internal 16 MHz factory-trimmed RC
- Internal 38 kHz low consumption RC
- Low power RTC
- BCD calendar with alarm interrupt
- Digital calibration with +/- 0.5 ppm accuracy
- Auto-wakeup from Halt w/ periodic interrupt
- Memories
- Up to 8 Kbytes of Flash program memory plus 256 bytes of data EEPROM with ECC
- Flexible write/read protection modes
- DMA
- 4 channels supporting ADC, SPI, I²C, USART, timers
- 1 channel for memory-to-memory
- 12-bit ADC up to 1 Msps/28 channels
- Temp. sensor and internal ref. voltage
- 2 ultralow power comparators
- 1 with fixed threshold and 1 rail to rail
- Timers
- Two 16-bit timers with 2 channels (IC, OC, PWM), quadrature encoder (TIM2, TIM3)
- One 8-bit timer with 7-bit prescaler (TIM4)
- 1 Window and 1 independent watchdog
- Beeper timer with 1, 2 or 4 kHz frequencies
- Communication interfaces
- One synchronous serial interface (SPI)
- Up to 41 I/Os, all mappable on interrupt vectors
- Up to 20 capacitive sensing channels supporting touchkey, proximity touch, linear touch, and rotary touch sensors
- Development support
- Fast on-chip programming and non-intrusive debugging with SWIM
- 96-bit unique ID
STM8L151K3 订购信息
| 订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
| STM8L151K3U6 |
Active |
0.9175 |
1000 |
UFQFPN 32 5x5x0.55 |
Tray |
-40 °C-85 °C |
STM8L151K3U6 |
| STM8L151K3U3 |
Active |
1.0336 |
1000 |
UFQFPN 32 5x5x0.55 |
Tray |
-40 °C-85 °C |
STM8L151K3U3 |
DATASHEET
| 描述 |
版本 |
大小 |
| STM8L151K3 : DS7204: 8-bit ultralow power MCU, up to 8 KB Flash, up to 256 B data EEPROM, RTC, timers, USART, I²C, SPI, ADC, comparators |
4 |
1675KB |
APPLICATION NOTES
| 描述 |
版本 |
大小 |
| AN3133: Using the STM8L15x/STM8L16x real time clock |
3 |
446KB |
| AN3117: Using the STM8L15x/STM8L162 DMA controller |
2 |
401KB |
| AN3147: STM8L family power management |
1 |
206KB |
| AN3101: STM8L15x internal RC oscillator calibration |
3 |
253KB |
| AN3281: STM8 I²C optimized examples |
1 |
225KB |
| AN2659: STM8 in-application programming (IAP) using a customized user-bootloader |
3 |
236KB |
| AN2639: Soldering recommendations and package information for Lead-free ECOPACK® microcontrollers |
2 |
209KB |
| AN1015: Software techniques for improving microcontroller EMC performance |
1 |
105KB |
| AN2719: Precision improvement techniques for the A/D converter of the STM8 microcontroller |
2 |
239KB |
| AN3139: Migration and compatibility guidelines for STM8L microcontroller applications |
3 |
802KB |
| AN3269: Introduction to STM8L15x power saving modes using the STM8L-DISCOVERY IDD measurement feature |
1 |
212KB |
| AN3236: Guidelines to increase the number of touchkeys with the STM8 Touch Sensing Library |
1 |
202KB |
| AN3181: Guidelines for obtaining IEC60335 Class B certification in an STM8 application |
1 |
458KB |
| AN2869: Guidelines for designing touch sensing applications |
6 |
980KB |
| AN3029: Getting started with STM8L |
3 |
1537KB |
| AN2860: EMC guidelines for STM8 microcontrollers |
4 |
215KB |
| AN1709: EMC design guide for ST microcontrollers |
1 |
657KB |
| AN1181: Electrostatic discharge sensitivity measurement |
1 |
59KB |
| AN2966: Capacitor selection guide for STM8T141and touch sensing library-based capacitive sensors |
2 |
97KB |
| AN3225: Audio software codec for the STM8L15xxx |
2 |
266KB |
| AN3137: A/D converter on STM8L devices: description and precision improvement techniques |
2 |
729KB |
ERRATA SHEETS
| 描述 |
版本 |
大小 |
| ES0002: STM8L151x2 and STM8L151x3 revision Z device limitations |
2 |
193KB |
LICENSE AGREEMENTS
PROGRAMMING MANUALS
| 描述 |
版本 |
大小 |
| PM0044: STM8 CPU programming manual |
3 |
900KB |
| PM0054: How to program STM8S and STM8A Flash program memory and data EEPROM |
7 |
270KB |
REFERENCE MANUALS
| 描述 |
版本 |
大小 |
| RM0031: STM8L05xx, STM8L15xx and STM8L16xx microcontroller family |
9 |
4800KB |
USER MANUALS
| 描述 |
版本 |
大小 |
| UM0784: STM8L1526-EVAL demonstration firmware |
1 |
319KB |
| UM0462: STM32™ and STM8™ Flash loader demonstrator |
7 |
1673KB |
| UM0470: STM8 SWIM communication protocol and debug module |
3 |
532KB |
| UM0560: STM8 bootloader |
5 |
802KB |
PRODUCT PRESENTATIONS
TECHNICAL NOTES
| 描述 |
版本 |
大小 |
| TN0189: STM8 bootloader frequently asked questions |
2 |
321KB |
BOARDS AND TOOLS
| Part Number |
描述 |
| STM-STUDIO |
STM Studio run-time variables monitoring and visualization tool |
| STVP |
ST Visual Programmer for programming ST7, STM8, STM8T and STM32 |
| STM8L15LPBOARD |
Low-cost demonstration board for STM8L (32KB flash) Low Power MCUs |
| AD/Stice_Connect |
Connection Adapter to use with STICE-SYS00x emulation systems |
| STM8-TOUCH-LIB |
STM8 touch sensing library |
| ST-LINK |
In-circuit debugger and programmer for STM8 and STM32 MCUs; with IAR EWARM and Keil RVMDK and ST toolset |
| AS/Stice_Connect |
Adapter Socket for application board - to use with STICE-SYS00x emulation systems |
| STMPRIMER |
EvoPrimer components to build your own EvoPrimer for easy evaluation and development with STM32 and STM8 MCUs |
| STM8L-PRIMER |
Complete EvoPrimer ready to use from Raisonance for easy evaluation and development with STM8L MCUs |
| STM8L-DISCOVERY |
Discovery kit for the STM8L EnergyLite 8-bit MCUs |
| ST-LINK/V2 |
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 |
| STVD |
ST Visual develop IDE for developing ST7 and STM8 applications |
| STICE |
Full-featured emulator offers flexible, modular debugging and programming solution |
| STX-RLINK |
In-circuit debugger/programmer supporting JTAG and ICC protocols for STM8, ST7, uPSD, STM32, STR7 and STR9 microcontrollers |
| CF/Stice_Connect |
Connexion flex to use with STICE-SYS00x emulation systems |
| STM8L1526-EVAL |
Evaluation board for STM8L15x/16x (32KB flash) ErnergyLite 8-bit MCUs |
| STMT/8L-EV1 |
Touch sensing Library for STM8L - Evaluation board |
FIRMWARE
SW DEMOS
DEVICE PROGRAMMERS
MARKETING BROCHURES
| 描述 |
版本 |
大小 |
| BRULP00611 : STM32L and STM8L MCU families |
1.0.0 |
1468KB |
| BRSTM800212 : STM8 product families |
1.0.0 |
1565KB |
