AT49F1024A-45VL 1Mbit,Flash存储器VSOP-40封装

Density 1M
Organization 64K x 16
Speed 45 ns
Vcc (V) 4.5
Pb-Free
Packages
VSOP 40

1M bit (64K x 16), 5-Volt Read and 5-Volt Write Flash

The AT49F1024A is a 5-volt-only in-system Flash memory organized as 65,536 words by 16 bits. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the devices offer access times to 45 ns with power dissipation of just 275 mW over the commercial temperature range. When the device is deselected, the CMOS standby current is less than 100 μA. To allow for simple in-system reprogrammability, the AT49F1024A does not require high-input voltages for programming. Five-volt-only commands determine the read and programming operation of the device. Reading data out of the device is similar to reading from an EPROM. Reprogramming the AT49F1024A is performed by erasing a block of data (entire chip or main memory block) and then programming on a word-byword basis. The typical word programming time is a fast 10 μs. The end of a program cycle can be optionally detected by the Data Polling feature. Once the end of a byte program cycle has been detected, a new access for a read or program can begin. The typical number of program and erase cycles is in excess of 10,000 cycles.

AT49F1024A-45VL 特性
AT49F1024A-45VL 订购型号
tACC
(ns)
ICC (mA) Ordering Code Package Operation Range
Active Standby
45 50 0.1 AT49F1024A-45VC 40V Commercial
(-40° to 85° C)
AT49F1024A-45VL
AT49F1024A-45VL 应用技术支持与电子电路设计开发资源下载
  1. ATMEL 爱特梅尔Flash 存储器AT49F1024A 数据手册DataSheet 下载. PDF(PDF 文件格式完整版)
  2. 并行Flash 产品选型指南Excel 文档格式选型 Excel 文档格式)
  3. ATMEL 爱特梅尔公司全线产品目录. pdf