ISO8200B:Galvanic isolated octal high side smart power solid state relay

The ISO8200B is a galvanic isolated 8-channel driver featuring a very low supply current. It contains 2 independent galvanic isolated voltage domains (Vccfor the Power stage and Vddfor the Digital stage). Additional embedded functions are: loss of GND protection, undervoltage shutdown with hysteresis, and reset function for immediate power output shutdown.

The IC is intended to drive any kind of load with one side connected to ground. Active channel current limitation combined with thermal shutdown, (independent for each channel), and automatic restart, protect the device against overload and short-circuit. In overload conditions, if junction temperature overtakes threshold, the channel involved is turned off and on again automatically after the IC temperature decreases below a reset threshold. If this condition causes case temperature to reach limit threshold TCR, the overloaded channel is turned off and it only restarts when case and junction temperature decrease down to the reset thresholds. Non-overloaded channels continue operating normally. An internal circuit provides an OR-wired not latched common FAULT indicator signaling the channel OVT. The FAULT pin is an open drain active low fault indication pin.

Key Features

  • Parallel input interface
  • Direct and synchronous control mode
  • High common mode transient immunity
  • Output current: 0.7 A per channel
  • Short-circuit protection
  • Channel overtemperature protection
  • Thermal independence of separate channels
  • Common output disable pin
  • Case overtemperature protection
  • Loss of GNDcc and Vcc protection
  • Undervoltage shutdown with auto restart and hysteresis
  • Overvoltage protection (Vcc clamping)
  • Very low supply current
  • Common fault open drain output
  • 5 V and 3.3 V TTL/CMOS compatible I/Os
  • Fast demagnetization of inductive loads
  • Reset function for IC outputs disable
  • ESD protection
  • IEC 61000-4-2, IEC 61000-4-4, IEC 61000-4-5 and IEC 61000-4-8 compliant
产品规格
DescriptionVersionSize
DS9322: Galvanic isolated octal high-side smart power solid state relay9.01 MB
应用手册
DescriptionVersionSize
AN4373: Galvanically-isolated 8 channel high-side driver based on the ISO8200B1.01 MB
选型指南
DescriptionVersionSize
Intelligent power switches (IPS)09.20161023 KB
手册
DescriptionVersionSize
Brochure Power management guide05.20167 MB
Evaluation Tool Software
型号制造商Description
STSW-IFP001IPS Evaluation Tool
STSW-IFP015STSW-IFP015 application software setup
解决方案评估工具
型号制造商Description
STEVAL-IFP015V2ISO8200B High Side Driver - 8 Channels evaluation board
STEVAL-PCC009V2IBU Motor Control & IPS universal interface
样片和购买
型号PackagePacking TypeUnit Price (US$) *QuantityECCN (EU)ECCN (US)Country of Origin
ISO8200BPowerSO 36Tube3.5071000NECEAR99-
ISO8200BTRPowerSO 36Tape And Reel3.5071000NECEAR99-
质量和可靠性
型号PackageGradeRoHS Compliance GradeMaterial Declaration**
ISO8200BPowerSO 36IndustrialEcopack2
ISO8200BTRPowerSO 36IndustrialEcopack2
Galvanic isolated octal high-side smart power solid state relay ISO8200B
Galvanically-isolated 8 channel high-side driver based on the ISO8200B STEVAL-IFP015V2
Interface circuit - relay and lamp-driver TDE1737
Very low drop voltage regulators with inhibit KFXX