• 简体中文
• English

SPC574K72E5：32-bit Power Architecture MCU for Automotive Applications

This family of MCUs targets automotive powertrain controller applications for four-cylinder gasoline and diesel engines, chassis control applications, transmission control applications, steering and braking applications, as well as low-end hybrid applications.

Many of the applications are considered to be functionally safe and the family is designed to achieve ISO26262 ASIL-D compliance.

Key Features

• Two main 32-bit Power Architecture® VLE compliant CPU core (e200z4), dual issue, running in lockstep
  • Single-precision floating point operations
  • 16 KB local instruction SRAM and 64 KB local data SRAM
  • 4 KB I-Cache and 2 KB D-Cache
• One 32-bit Power Architecture® VLE compliant I/O processor core (e200z2)
  • Single-precision floating point operations
  • Lightweight Signal Processing Auxiliary Processing Unit (LSP APU) instruction support for digital signal processing (DSP)
  • 16 KB local instruction SRAM and 48 KB local data SRAM
• 2624 KB on-chip flash memory
  • Supporting EEPROM emulation (64 KB)
• 64 KB on-chip general-purpose SRAM (+112 KB data RAM included in the CPUs)
• Multi-channel direct memory access controller (eDMA) with 32 channels
• Dual interrupt controller (INTC)
• Dual phase-locked loops, including one Frequency-modulated
• System integration unit lite (SIUL)
• Boot Assist Flash (BAF) supports factory programming using serial bootload through ‘Serial Boot Mode Protocol’. Physical Interface (PHY) can be:
  • UART
  • CAN
• Generic timer module (GTM122)
  • Intelligent complex timer module
  • 88 channels (24 input and 64 output)
  • 3 programmable fine grain multi-threaded cores
  • 26 KB of dedicated SRAM
  • Hardware support for engine control, motor control and safety related applications
• Enhanced analog-to-digital converter system with:
  • 5 separate 12-bit SAR analog converters
  • 2 separate 16-bit Sigma-Delta analog converters
• 5 Deserial Serial Peripheral Interface (DSPI) modules
• 5 LIN and UART communication interface (LINFlexD) modules
• 2 modular controller area network (M_CAN) modules, and one time-triggered controller area network (M_TTCAN).
• Dual-channel FlexRay controller
• Nexus development interface (NDI) per IEEE-ISTO 5001-2003 standard, with partial support for 2010 standard
• Device and board test support per Joint Test Action Group (JTAG) (IEEE 1149.1)
• On-chip voltage regulator controller manages the supply voltage down to 1.2 V for core logic
• Designed for eTQFP144 and eLQFP176

产品规格

应用手册

Technical Notes & Articles

用户手册

参考手册

勘误手册

简报

Smart selectors

Hardware Development Tools

Software Development Tools

MCUs Embedded Software

Product Evaluation Tools

样片和购买

质量和可靠性