ZSM560：Reset Generators
| Part Number | Data Sheet | SPICE Model | Detect Voltages (V) | MinimumInput Voltage (V) | MaximumInput Voltage (V) | Quiescent Current (µA) | Typical Time Delay (ms) | RESET Output (Active High) | RESET Output (Active Low) | MR | Watchdog | Reset Output Topology | Operating Ambient Temperature Range (°C) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZSM560 | ZSM560.pdf | - | 4.6 | 1 | 6.5 | 200 | - | No | Yes | No | No | Open Collector | -40 to +85 |
Description
The ZSM560 is a three terminal under voltage monitor circuit for use in microprocessor systems. The threshold voltage of the device has been set to 4.6V making it ideal for 5 volt circuits. Included in the device is a precise voltage reference and a comparator with built in hysteresis to prevent erratic operation. The ZSM560 features an open collector output capable of sinking at least l0mA which only requires a single external resistor to interface to following circuits. Operation of the device is guaranteed from one volt upwards, from this level to the device threshold voltage the output is held low providing a power on reset function. Should the supply voltage, once established, at any time drop below the threshold level then the output again will pull low. The device is available in a TO92 package for through hole applications as well as SOT223 for surface mount requirements.
Application
- Microprocessor systems
- Computers
- Computer peripherals
- Instrumentation
- Automotive
- Battery powered equipment
Features
- SOT223 and TO92 packages
- Power on reset generator
- Automatic reset generation
- Low standby current
- Guaranteed operation from 1V
- Wide supply voltage range
- Internal clamp diode to discharge delay capacitor
- 4.6V threshold for 5V logic
- 20mV hysteresis prevents erratic operation
Ordering Information
- ZSM560GTA
SOT223
- ZSM560.pdf ZSM560
