• 简体中文
• English

LT6600-10 - Very Low Noise, Differential Amplifier and 10MHz Lowpass Filter

The LT6600-10 combines a fully differential amplifier with a 4th order 10MHz lowpass filter approximating a Chebyshev frequency response. Most differential amplifiers require many precision external components to tailor gain and bandwidth. In contrast, with the LT6600-10, two external resistors program differential gain, and the filter’s 10MHz cutoff frequency and passband ripple are internally set. The LT6600-10 also provides the necessary level shifting to set its output common mode voltage to accommodate the reference voltage requirements of A/Ds.

Using a proprietary internal architecture, the LT6600-10 integrates an antialiasing filter and a differential amplifier/driver without compromising distortion or low noise performance. At unity gain the measured in band signal-to- noise ratio is an impressive 82dB. At higher gains the input referred noise decreases so the part can process smaller input differential signals without significantly degrading the output signal-to-noise ratio.

The LT6600-10 also features low voltage operation. The differential design provides outstanding performance for a 2VP-P signal level while the part operates with a single 3V supply.

For similar devices with other cutoff frequencies, refer to the LT6600-20, LT6600-15, LT6600-5 and LT6600-2.5.

Features Programmable Differential Gain via Two External Resistors Adjustable Output Common Mode Voltage Operates and Specified with 3V, 5V, ±5V Supplies 0.5dB Ripple 4th Order Lowpass Filter with 10MHz Cutoff 82dB S/N with 3V Supply and 2VP-P Output Low Distortion, 2VP-P , 800Ω Load 1MHz: 88dBc 2nd, 97dBc 3rd 5MHz: 74dBc 2nd, 77dBc 3rd Fully Differential Inputs and Outputs Compatible with Popular Differential Amplifier Pinouts SO-8 and DFN-12 Packages Typical Application

Applications High Speed ADC Antialiasing and DAC Smoothing in Networking or Cellular Base Station Applications High Speed Test and Measurement Equipment Medical Imaging Drop-In Replacement for Differential Amplifiers Packaging

Demo Boards