The LT6600-5 combines a fully differential amplifier with a 4th order 5MHz lowpass filter approximating a Chebyshev frequency response. Most differential amplifiers require many precision external components to tailor gain and bandwidth. In contrast, with the LT6600-5, two external resistors program differential gain, and the filter's 5MHz cutoff frequency and passband ripple are internally set. The LT6600-5 also provides the necessary level shifting to set its output common mode voltage to accommodate the reference voltage requirements of A/Ds.
Using a proprietary internal architecture, the LT6600-5 integrates an antialiasing filter and a differential amplifier/driver without compromising distortion or low noise performance. At unity gain the measured in band signal-to-noise ratio is an impressive 82dB. At higher gains the input referred noise decreases so the part can process smaller input differential signals without significantly degrading the output signal-to-noise ratio.
The LT6600-5 also features low voltage operation. The differential design provides outstanding performance for a 2VP-P signal level while the part operates with a single 3V supply.
For similar devices with other cutoff frequencies, refer to the LT6600-20, LT6600-10 and LT6600-2.5.
Part Number | Package | Temp | Price(1-99) | Price (1k)* |
---|---|---|---|---|
LT6600CS8-5#PBF | SO-8 | C | $3.80 | $2.95 |
LT6600CS8-5#TRPBF | SO-8 | C | $3.01 | |
LT6600IS8-5#PBF | SO-8 | I | $4.35 | $3.40 |
LT6600IS8-5#TRPBF | SO-8 | I | $3.46 |
Part Number | Description | Price |
---|---|---|
DC962A-B | LT6600-5 Fc=5Mhz | $75.00 |