• 简体中文
• English

LT6600-2.5 - Very Low Noise, Differential Amplifi er and 2.5MHz Lowpass Filter

The LT6600-2.5 combines a fully differential amplifier with a 4th order 2.5MHz lowpass filter approximating a Chebyshev frequency response. Most differential amplifiers require many precision external components to tail or gain and bandwidth. In contrast, with the LT6600-2.5, two external resistors program differential gain, and the filter’s 2.5MHz cutoff frequency and passband ripple are internally set. The LT6600-2.5 also provides the necessary level shifting to set its output common mode voltage to accommodate the reference voltage requirements of A/Ds.

Using a proprietary internal architecture, the LT6600-2.5 integrates an antialiasing filter and a differential amplifier/driver without compromising distortion or low noise performance. At unity gain the measured in band signal-to- noise ratio is an impressive 86dB. At higher gains the input referred noise decreases so the part can process smaller input differential signals without significantly degrading the output signal-to-noise ratio.

For similar devices with higher cutoff frequency, refer to the LT6600-5, LT6600-10, LT6600-15 and LT6600-20 data sheets.

Features ±0.6dB (Max) Ripple 4th Order Lowpass Filter with 2.5MHz Cutoff Programmable Differential Gain via Two External Resistors Adjustable Output Common Mode Voltage Operates and Specified with 3V, 5V, ±5V Supplies 86dB S/N with 3V Supply and 1VRMS Output Low Distortion, 1VRMS, 800Ω Load 1MHz: 95dBc 2nd, 88dBc 3rd Fully Differential Inputs and Outputs Compatible with Popular Differential Amplifier Pinouts SO-8 and DFN-12 Packages Typical Application

Applications High Speed ADC Antialiasing and DAC Smoothing in Networking or Cellular Basestation Applications High Speed Test and Measurement Equipment Medical Imaging Drop-in Replacement for Differential Amplifiers Packaging

Demo Boards