LTC2418 - 8-/16-Channel 24-Bit No Latency Delta Sigma ADCs

The LTC2414/LTC2418 are 8-/16-channel (4-/8-differential) micropower 24-bit Delta Ssigma analog-to-digital converters. They operate from 2.7V to 5.5V and include an integrated oscillator, 2ppm INL and 0.2ppm RMS noise. They use delta-sigma technology and provide single cycle settling time for multiplexed applications. Through a single pin, the LTC2414/LTC2418 can be configured for better than 110dB differential mode rejection at 50Hz or 60Hz ±2%, or they can be driven by an external oscillator for a user-defined rejection frequency. The internal oscillator requires no external frequency setting components.

The LTC2414/LTC2418 accept any external differential reference voltage from 0.1V to VCC for flexible ratiometric and remote sensing measurement applications. They can be configured to take 4/8 differential channels or 8/16 single-ended channels. The full-scale bipolar input range is from -5VREF to 0.5VREF. The reference common mode voltage, VREFCM, and the input common mode voltage, VINCM, may be independently set within GND to VCC. The DC common mode input rejection is better than 140dB.

The LTC2414/LTC2418 communicate through a flexible 4-wire digital interface that is compatible with SPI and MICROWIRE protocols.

Features
  • 8-/16-Channel Single-Ended or 4-/8-Channel Differential Inputs (LTC2414/LTC2418)
  • Low Supply Current (200µA Plus 4µA Autosleep)
  • Differential Input and Differential Reference with GND to VCC Common Mode Range
  • 2ppm INL, No Missing Codes
  • 2.5ppm Full-Scale Error and 0.5ppm Offset
  • 0.2ppm Noise
  • No Latency: Digital Filter Settles in a Single Cycle. Each Conversion Is Accurate, Even After a New Channel is Selected
  • Single Supply 2.7V to 5.5V Operation
  • Internal Oscillator—No External Components Required
  • 110dB Min, 50Hz/60Hz Notch Filter
Typical Application

Applications
  • Direct Sensor Digitizer
  • Weight Scales
  • Direct Temperature Measurement
  • Gas Analyzers
  • Strain Gauge Transducers
  • Instrumentation
  • Data Acquisition
  • Industrial Process Control
Packaging

Order Information
Part NumberPackageTempPrice(1-99)Price (1k)*
LTC2418CGN#PBFSSOP-28C$9.00$6.95
LTC2418CGN#TRPBFSSOP-28C$7.05
LTC2418IGN#PBFSSOP-28I$9.90$7.70
LTC2418IGN#TRPBFSSOP-28I$7.80
Demo Boards
Part NumberDescriptionPrice
DC571ALTC2418CGN Demo Board | 8-Channel Differential Input 24-Bit ADC, (req DC2026)$50.00
Companion Boards
Part NumberDescriptionPrice
DC2026CLinduino One Isolated USB Demo Board: An Arduino- and QuikEval-Compatible Code Development Platform$75.00
Datasheet
Application Note
Design Note
Reliability Data
Product Selector Card
Linduino
Related Product
LTC2414/LTC2418 - 8-/16-Channel 24-Bit No Latency Delta Sigma ADCs
LTC2418 Package Drawing LTC2418
AN96 - Delta Sigma ADC Bridge Measurement Techniques
DN297 - 16-Channel, 24-Bit ΔΣ ADC Provides Small, Flexible and Accurate Solutions for Data Acquisition
DN549 - 给 Altera Arria 10 FPGA 和 Arria 10 SoC 供电:经过测试和验证的电源管理解决方案
R411 Reliability Data
No Latency Delta-Sigma™ ADCs
Avoid Debugging Cycles in Power Management for FPGA, GPU and ASIC Systems
LTC2418 Footprints and Symbols
LTC2418 - DC571A Linduino .INO File
LTC2418 Linduino .CPP File
LTC2418 Linduino Header File