DS75:Digital Thermometer and Thermostat

The DS75 digital thermometer and thermostat provides 9, 10, 11, or 12-bit digital temperature readings over a -55°C to +125°C range with ±2°C accuracy over a -25°C to +100°C range. At power-up, the DS75 defaults to 9-bit resolution for software compatibility with the LM75. Communication with the DS75 is achieved via a simple 2-wire serial interface. Three address pins allow up to eight DS75 devices to operate on the same 2-wire bus, which greatly simplifies distributed temperature sensing applications. The DS75 thermostat has a dedicated open-drain output (O.S.) and programmable fault tolerance, which allows the user to define the number of consecutive error conditions that must occur before O.S is activated. There are two thermostatic operating modes that control thermostat operation based on user-defined trip-points (TOS and THYST). A block diagram of the DS75 is shown in Figure 1 and detailed pin descriptions are given in Table 2.

Key Features
  • Temperature Measurements Require No External Components
  • Measures Temperatures from -55°C to +125°C (-67°F to +257°F)
  • ±2°C Accuracy Over a -25°C to +100°C Range
  • Thermometer Resolution is User-Configurable from Nine (Default) to 12 Bits (0.5°C to 0.0625°C Resolution)
  • 9-Bit Conversion Time is 150ms (Max)
  • Thermostatic Settings are User-Definable
  • Data is Read/Written Via 2-Wire Serial Interface (SDA and SCL Pins)
  • Multidrop Capability Simplifies Distributed Temperature-Sensing Applications
  • Wide Power-Supply Range (+2.7V to +5.5V).
  • Pin/software Compatible with the LM75
  • Available in 8-Pin µMAX® and SO Packages. See Table 1 for Ordering Information
  • Applications Include Personal Computers, Cellular Base Stations, Office Equipment, or Any Thermally Sensitive System
DS75: Functional Block Diagram
DS75: Functional Block Diagram
Applications/Uses
  • Any Thermally Sensitive System
  • Cell Phone Base Stations
  • Office Equipment
  • Personal Computing
DataSheet
titleDownload file
DS75 Data SheetDS75.pdf
Parametrics
Part NumberSensor TypeInterfaceChannelsAccuracy
(±°C)
Parasite Pwr.Temp. Thresh.Temp. Resolution
(bits)
Multi DroppableOper. Temp.
(°C)
Package/PinsBudgetary
Price
See Notes
DS75Local2-Wire/I2C/SMBusOne2NoProgrammable9
10
11
12
Yes-55 to +125µMAX/8
SOIC(N)/8
$0.90 @1k
Quality and Environmental Data
Related Products
  • DS7505:High-Precision Digital Thermometer and Thermostat
  • DS75LX:Digital Thermometer and Thermostat with Extended Addressing
  • DS75LV:Digital Thermometer and Thermostat
  • DS1775:Digital Thermometer and Thermostat in SOT23
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
DS75SNo Longer AvailableDS75S+SOIC(N),;8 pin;30.9 mm²-55°C to +125°CNo
DS75S+ActiveSOIC(N),;8 pin;30.9 mm²-55°C to +125°CLead Free
DS75S+T&RActiveSOIC(N),;8 pin;30.9 mm²-55°C to +125°CLead Free
DS75S-C11+ActiveSOIC(N),;8 pin;30.9 mm²-55°C to +125°CLead Free
DS75S-C11+T&RActiveSOIC(N),;8 pin;30.9 mm²-55°C to +125°CLead Free
DS75UNo Longer AvailableDS75U+µMAX,;8 pin;15.6 mm²-55°C to +125°CNo
DS75U+ActiveµMAX,;8 pin;15.6 mm²-55°C to +125°CLead Free
DS75U+T&RActiveµMAX,;8 pin;15.6 mm²-55°C to +125°CLead Free
DS75U-C12+T&RActiveµMAX,;8 pin;15.6 mm²0°C to +70°CLead Free
DS75U-C12/T&RNo Longer AvailableDS75U+µMAX,;8 pin;15.6 mm²-55°C to +125°CNo
Part NumberStatusRecommended ReplacementPackageTempRoHS
DS75U/T&RNo Longer AvailableDS75U+T&RµMAX,;8 pin;15.6 mm²-55°C to +125°CNo
DS75.pdf DS75
DS75.pdf DS75
DS75.pdf DS75
Understanding Multidrop Address Assignments for Thermal Sensors MAX7504
Power-Supply Solutions for Altera FPGAs MAX17040
Power-Supply Solutions for Xilinx FPGAs MAX17040
Package Thermal Resistance Values (Theta JA, Theta JC) for Temperature Sensors and 1-Wire Devices MAX31826
DS75.pdf DS75
DS75.pdf DS75