DS75LV:Digital Thermometer and Thermostat

±2.0°C Accurate Digital Temperature Sensor Operates From a Supply of Only 1.7V to 3.7V

The DS75LV low-voltage (1.7V to 3.7V) digital thermometer and thermostat provides 9-, 10-, 11-, or 12-bit digital temperature readings over a -55°C to +125°C range with ±2°C accuracy over a -25°C to +100°C range. At power-up, the DS75LV defaults to 9-bit resolution for software compatibility with the LM75. Communication with the DS75LV is achieved through a simple 2-wire serial interface. Three address pins allow up to eight DS75LV devices to operate on the same 2-wire bus, which greatly simplifies distributed temperature-sensing applications. The DS75LV thermostat has a dedicated open-drain output (O.S.) and programmable fault tolerance, which allows the user to define the number of consecutive error conditions that must occur before O.S is activated. There are two thermostatic operating modes that control thermostat operation based on user-defined trip-points (TOS and THYST). A block diagram of the DS75LV is shown in Figure 1 and detailed pin descriptions are given in Table 1 of the full data sheet.

Key Features
  • Extend Performance Range with Low-Voltage, 1.7V to 3.7V Operating Range
  • Maximize System Accuracy in Broad Range of Thermal Management Applications
    • Measures Temperature from -55°C to +125°C (-67°F to +257°F)
    • ±2°C Accuracy over a -25°C to 100°C Range
    • User-Configurable Resolution from 9 Bits (Default) to 12 Bits (0.5°C to 0.0625°C)
  • Easy Upgrade to LM75: Pin and Software Compatible
  • Simplify Distributed Temperature-Sensing Applications with Multidrop Capability
    • Up to Eight DS75LVs Can Operate on 2-Wire Bus
  • Increase Reliability and System Robustness
    • Internally Filtered Data Lines for Noise Immunity (50ns Deglitch)
    • Bus Timeout Feature Prevents Lockup on 2-Wire Interface
  • Minimize Power Consumption with Built-In Shutdown Mode
  • Flexible User-Defined Thermostatic Modes with Programmable Fault Tolerance
DS75LV: Functional Block Diagram
DS75LV: Functional Block Diagram
Applications/Uses
  • Any Thermally Sensitive System
  • Cellular Base Stations
  • Office Equipment
  • Personal Computers
DataSheet
titleDownload file
DS75LV Data SheetDS75LV.pdf
Parametrics
Part NumberSensor TypeInterfaceChannelsAccuracy
(±°C)
Parasite Pwr.Temp. Thresh.Temp. Resolution
(bits)
Multi DroppableOper. Temp.
(°C)
Package/PinsBudgetary
Price
See Notes
DS75LVLocal2-Wire/I2C/SMBusOne2NoProgrammable9
10
11
12
Yes-55 to +125µMAX/8
SOIC(N)/8
$1.00 @1k
Quality and Environmental Data
Related Products
  • DS7505:High-Precision Digital Thermometer and Thermostat
  • DS75LX:Digital Thermometer and Thermostat with Extended Addressing
  • DS75:Digital Thermometer and Thermostat
  • DS1775:Digital Thermometer and Thermostat in SOT23
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
DS75LVSNo Longer AvailableDS75LVS+SOIC(N),;8 pin;30.9 mm²-55°C to +125°CNo
DS75LVS+ActiveSOIC(N),;8 pin;30.9 mm²-55°C to +125°CLead Free
DS75LVS+T&RActiveSOIC(N),;8 pin;30.9 mm²-55°C to +125°CLead Free
DS75LVS/T&RNo Longer AvailableDS75LVS+T&RSOIC(N),;8 pin;30.9 mm²-55°C to +125°CNo
DS75LVUNo Longer AvailableDS75LVU+µMAX,;8 pin;15.6 mm²-55°C to +125°CNo
DS75LVU+ActiveµMAX,;8 pin;15.6 mm²-55°C to +125°CLead Free
DS75LVU+T&RActiveµMAX,;8 pin;15.6 mm²-55°C to +125°CLead Free
DS75LVU/T&RNo Longer AvailableDS75LVU+T&RµMAX,;8 pin;15.6 mm²-55°C to +125°CNo
DS75LV.pdf DS75LV
DS75LV.pdf DS75LV
DS75LV.pdf DS75LV
Understanding Multidrop Address Assignments for Thermal Sensors MAX7504
How Continuous Positive Airway Pressure (CPAP) Respiratory Ventilation Systems Function DS75LV
Package Thermal Resistance Values (Theta JA, Theta JC) for Temperature Sensors and 1-Wire Devices MAX31826
DS75LV.pdf DS75LV