• 简体中文
• English

MAX15096, MAX15096A, MAX15096D：2.7V to 18V, 6A Integrated Hot-Swap/Electronic Circuit Breaker

2.7V-18V Input, Smallest 6A Hot-Swap Solution with Only 12mΩ RDSON and 10% Circuit Breaker Threshold Accuracy

The MAX15096/MAX15096A/MAX15096D ICs are integrated solutions for hot-swap applications requiring the safe insertion and removal of circuit line cards from a live backplane. They can also be used as electronics circuit breaker for hard drive and solid-state drive and fans. The devices integrate a hot-swap controller, 12mΩ (typ) power MOSFET, and an electronic circuit-breaker protection in a single package. The devices are designed for protection of 2.7V to 18V supply voltages. These devices implement a foldback current limit during startup to control inrush current, lowering di/dt and keeping the MOSFET operating under safe operating area (SOA) conditions. After the startup cycle is complete, on-chip comparators provide VariableSpeed/BiLevel™ protection against short-circuit and overcurrent faults, and immunity against system noise and load transients. The load is disconnected in the event of a fault condition. The devices are factory calibrated to deliver accurate overcurrent protection with ±10% accuracy. During a fault condition, PG goes low and the devices latch off (MAX15096) or automatic retry (MAX15096A); the output could also be discharged after a fault event (MAX15096D). The devices feature an IN-to-OUT short-circuit detection before startup. The devices provide a power-MOSFET GATE pin to program the slew rate during startup by adding an external capacitor. The devices have an undervoltage/overvoltage input pin (UVOV) that can detect an undervoltage/overvoltage fault and disconnect the IN from the OUT. Additional features include internal overtemperature protection and a power-good output (PG). The devices are available in a 16-bump, 2mm x 2mm wafer-level package (WLP) and are rated over the -40°C to +105°C extended temperature range.

Key Features Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs Integrated 12mΩ (typ) Internal Power MOSFET Programmable Overvoltage Protection and Undervoltage-Lockout Threshold Power-Good and Fault Outputs Analog Current Report Output without Need for External RSENSE Thermal Protection Flexibility Enables Use in Many Unique Designs 2.7V to 18V Operating Voltage Range Programmable Inrush Current Control Under SOA Operation Adjustable Circuit-Breaker Current/Current-Limit Threshold Programmable Slew-Rate Control Variable-Speed Circuit-Breaker Response Latchoff or Automatic Retry Options Safety Features Ensure Accurate, Robust Protection 6A (max) Load Current Capability ±10% Circuit-Breaker Threshold Accuracy IN-to-OUT Short-Circuit Detection Open-Drain PG Output Output Discharge After a Fault Event (MAX15096D Only) Programmable Additional Delay (2µs max) to Fast-Comparator Response Time Enable Input (EN)

MAX15096, MAX15096A, MAX15096D: Typical Application Circuit Applications/Uses Blade Servers Disk Drive Power Industrial Applications RAID Systems Server I/O Cards Storage Applications

DataSheet

Parametrics

Design kits & evaluation modules

• MAX15096AEVKIT
• MAX15096DEVKIT
• MAX15096EVKIT

Quality and Environmental Data

• MAX15096.pdf

Related Products

• MAX15091：2.7V to 18V, 9A, Integrated Hot-Swap Solution with Current Report Output
• MAX15090：2.7V to 18V, 12A, Hot-Swap Solution with Current Report Output

Ordering Information