• 简体中文
• English

MAX1575：White LED 1x/1.5x Charge Pump for Main and Sub-Displays

First 85% Efficient, Fractional, White-LED Charge Pump with Dual, Single-Wire Dimming Control for Main and Sub-Displays

The MAX1575 charge pump drives up to four white LEDs in the main display and up to two white LEDs in the sub-display with regulated constant current for uniform intensity. By utilizing adaptive 1x/1.5x charge-pump modes and very-low-dropout current regulators, it achieves high efficiency over the full 1-cell lithium-battery input voltage range. A 1MHz fixed-frequency switching allows for tiny external components, and the regulation scheme is optimized to ensure low EMI and low input ripple. The MAX1575 uses an external resistor to set the full-scale 100% LED current. Two enable inputs, ENM and ENS, are used for simple on/off controls for the main and sub-displays, respectively. By repeatedly pulsing either enable input, the LEDs can be dimmed in multiple steps down to 5%. Once the desired brightness is set, the MAX1575 maintains that brightness setting as long as the enable input is kept high. If an enable input is kept low for more than 2ms, the LED current for the respective display is set to zero. If both enable inputs are kept low for more than 2ms, the MAX1575 enters shutdown. The MAX1575 is available in a 16-pin 4mm x 4mm thin QFN package (0.8mm max height).

Key Features Powers Main and Sub-Display LEDs 85% Average Efficiency (PLED / PBATT) Over Li+ Battery Discharge 2% LED Current Matching Up to 30mA/LED Drive Capability Adaptive 1x/1.5x Mode Switchover Low Input Ripple and EMI Individual 5% to 100% Dimming Through Single-Wire Serial Pulse Interface Low 0.1µA Shutdown Current 2.7V to 5.5V Supply Voltage Range Soft-Start Limits Inrush Current Output-Overvoltage Protection Thermal-Shutdown Protection 16-Pin Thin QFN 4mm x 4mm Package

MAX1575: Typical Operating Circuit Applications/Uses Cell Phones with Main and Sub-Displays PDAs/Smartphones with Up to Six White LEDs

DataSheet

Parametrics

Design kits & evaluation modules

• MAX1575EVKIT

Related Products

• MAX1574：180mA, 1x/2x, White LED Charge Pump in 3mm x 3mm TDFN
• MAX1553：High-Efficiency, 40V Step-Up Converters for 2 to 10 White LEDs
• MAX1554：High-Efficiency, 40V Step-Up Converters for 2 to 10 White LEDs
• MAX1573：White LED 1x/1.5x Charge Pump in UCSP and Thin QFN
• MAX1582：High-Efficiency Step-Up Converters for White LED Main and Subdisplay Backlighting
• MAX1561：High-Efficiency, 26V Step-Up Converters for Two to Six White LEDs
• MAX1599：High-Efficiency, 26V Step-Up Converters for Two to Six White LEDs
• MAX1570：White LED Current Regulator with 1x/1.5x High-Efficiency Charge Pump
• MAX1912：1.5x/2x High-Efficiency White LED Charge Pumps
• MAX1910：1.5x/2x High-Efficiency White LED Charge Pumps
• MAX1595：Regulated 3.3V/5.0V Step-Up/Step-Down Charge Pump
• MAX1848：White LED Step-Up Converter in SOT23
• MAX1698：High-Efficiency Step-Up Current Regulator for LEDs

Ordering Information