MAX1583：White LED Camera-Flash Boost Converter
First 24V, White-LED, Flash/Strobe Supply for Camera Phones
The MAX1583 white LED boost converter drives up to five white LEDs with a constant current to provide camera flash/strobe in cell phones, PDAs, DSCs, and other hand-held devices. The MAX1583 includes a 24V boost converter and a high-voltage LDO current regulator for high efficiency and long battery life. Two logic inputs control four modes of operation: shutdown mode (0.5µA max), movie mode for high-efficiency continuous lighting (programmable up to 100mA), precharge mode for charging a reservoir capacitor to 24V while the LEDs are off (POK output indicates a full reservoir capacitor), and strobe mode for firing the flash during an exposure with a regulated current programmable up to 300mA. The MAX1583X, MAX1583Y, and MAX1583Z offer high, medium, and low current limits, respectively, to allow tradeoff between reservoir capacitor size and peak input current. The MAX1583 is available in a 10-pin 3mm x 3mm TDFN package (0.8mm max height).
Key Features
| MAX1583: Typical Operating Circuit Applications/Uses
|
DataSheet
| title | Download file |
|---|---|
| MAX1583 Data Sheet | MAX1583.pdf |
Parametrics
| Part Number | Battery Input | Regulation Topology | Max. No. of LEDs | LED Channels | LED Configuration | ILED per Channel (A) | Dimming Control | VCURR_SENSE (mV) | POUT (W) | VIN (V) | VIN (V) | ICC (mA) | LED String Volt. (V) | Oper. Freq. (kHz) | Package/Pins | Budgetary Price |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| max | min | max | max | max | See Notes | |||||||||||
| MAX1583 | 1-Cell Li+ | Inductor Based | 5 | 1 | Series | 0.3 | Analog Digital | 600 | 6 | 2.6 | 5.5 | 2.5 | 24 | 1000 | TDFN-EP/10 | $1.82 @1k |
Design kits & evaluation modules
Related Products
- MAX1574：180mA, 1x/2x, White LED Charge Pump in 3mm x 3mm TDFN
- MAX1553：High-Efficiency, 40V Step-Up Converters for 2 to 10 White LEDs
- MAX1554：High-Efficiency, 40V Step-Up Converters for 2 to 10 White LEDs
- MAX1573：White LED 1x/1.5x Charge Pump in UCSP and Thin QFN
- MAX1582：High-Efficiency Step-Up Converters for White LED Main and Subdisplay Backlighting
- MAX1561：High-Efficiency, 26V Step-Up Converters for Two to Six White LEDs
- MAX1599：High-Efficiency, 26V Step-Up Converters for Two to Six White LEDs
- MAX1570：White LED Current Regulator with 1x/1.5x High-Efficiency Charge Pump
- MAX1912：1.5x/2x High-Efficiency White LED Charge Pumps
- MAX1910：1.5x/2x High-Efficiency White LED Charge Pumps
- MAX1595：Regulated 3.3V/5.0V Step-Up/Step-Down Charge Pump
- MAX1848：White LED Step-Up Converter in SOT23
- MAX1698：High-Efficiency Step-Up Current Regulator for LEDs
Ordering Information
| Part Number | Status | Recommended Replacement | Package | Temp | RoHS |
|---|---|---|---|---|---|
| MAX1583XETB+T | Active | TDFN-EP,;10 pin;9.6 mm² | -40°C to +85°C | Lead Free | |
| MAX1583XETB-T | No Longer Available | MAX1583XETB+T | TDFN-EP,;10 pin;9.6 mm² | -40°C to +85°C | No |
| MAX1583YETB+T | No Longer Available | TDFN-EP,;10 pin;9.6 mm² | -40°C to +85°C | Lead Free | |
| MAX1583YETB-T | No Longer Available | TDFN-EP,;10 pin;9.6 mm² | -40°C to +85°C | No | |
| MAX1583ZETB+T | Active | TDFN-EP,;10 pin;9.6 mm² | -40°C to +85°C | Lead Free | |
| MAX1583ZETB-T | No Longer Available | MAX1583ZETB+T | TDFN-EP,;10 pin;9.6 mm² | -40°C to +85°C | No |
- MAX1583.pdf MAX1583
- MAX1583.pdf MAX1583
