• 简体中文
• English

MAX4925：Overvoltage Protectors with External pFET

Provides Overvoltage Protection for up to +28V

The MAX4923–MAX4926 overvoltage protection (OVP) controllers protect low-voltage systems against high-voltage faults of up to +28V with an appropriate external pFET. When the input voltage exceeds the overvoltage lockout (OVLO) threshold, or falls below the undervoltage lockout (UVLO) threshold, these devices turn off the pFET to prevent damage to protected components and issue a flag to notify the processor of a fault condition. The typical overvoltage trip level is set to 7.18V (MAX4923), 6.16V (MAX4924), 5.65V (MAX4925), and 4.46V (MAX4926). The undervoltage trip level is set to 2.44V (typ) for all devices. The input (IN) is ESD protected to ±15kV HBM when bypassed to ground with a 1µF ceramic capacitor. All devices are offered in a small, 6-pin (1.5mm x 1.0mm) µDFN package and are specified over the extended -40°C to +85°C temperature range.

Key Features Overvoltage Protection Up to +28V Preset 7.18V, 6.16V, 5.65V, and 4.46V Typical Overvoltage Trip Levels Preset 2.44V Typical Undervoltage Trip Level ±2.5% Accurate Overvoltage/Undervoltage Trip Levels Low 13µA (typ) Supply Current Drives External pFET 20ms Adapter Debounce Time Fault Flag Indicator 6-Pin (1.5mm x 1.0mm) µDFN Package

MAX4923, MAX4924, MAX4925, MAX4926: Typical Operating Circuit Applications/Uses Cell Phones Digital Still Cameras MP3 Players PDAs and Palmtop Devices

DataSheet

Parametrics

Quality and Environmental Data

• MAX4925.pdf

Ordering Information