MAX4971:Overvoltage-Protection Controllers with a Low RON Internal FET

Up to +28V Input Voltage Protection Without External nFET in a Small, 2mm x 1.5mm, 12-Bump WLP

The MAX4970/MAX4971/MAX4972 family of overvoltage protection devices features a low 40mΩ (typ) RON internal FET and protect low-voltage systems against voltage faults up to +28V. These devices also drive an optional external pFET to protect against reverse-polarity input voltages. When the input voltage exceeds the overvoltage threshold, the internal FET is turned off to prevent damage to the protected components. All switches feature a 2.3A (min) current-limit protection. During a short-circuit occurrence, the device operates in an autoretry mode where the internal MOSFET is turned on to check if the fault has been removed. The autoretry interval time is 15ms, and if the fault is removed, the MOSFET remains on. The MAX4970/MAX4971/MAX4972 feature an enable input (active-low EN) that controls the operation of the internal nFET as well as the optional external pFET. The use of active-low EN allows the external pFET to block reverse voltages independent of any signal present at the output. The overvoltage thresholds (OVLO) are preset to 4.65V (MAX4972), 5.8V (MAX4970), or 6.35V (MAX4971). The undervoltage thresholds (UVLO) are preset to 2.45V. When the input voltage drops below the UVLO, the devices enter a low-current standby mode. All devices are offered in a small 12-bump, WLP package and operate over the -40°C to +85°C extended temperature range.

Key Features
  • Input Voltage Protection up to +28V
  • Integrated nFET Switch
  • Reverse Voltage Protection with External pFET
  • Enable Input
  • Preset Overvoltage Protection Trip Level
    • 5.8V (MAX4970)
    • 6.35V (MAX4971)
    • 4.65V (MAX4972)
  • Low-Current Undervoltage-Lockout Mode
  • Short-Circuit Protection (Autoretry)
  • Internal 15ms Startup Delay and Retry Times
  • Input-Voltage Power-Good Logic Output
  • Thermal-Shutdown Protection
  • 2mm x 1.5mm, 12-Bump WLP Package
MAX4970, MAX4971, MAX4972: Typical Operating Circuit
MAX4970, MAX4971, MAX4972: Typical Operating Circuit
Applications/Uses
  • Cell Phones
  • Digital Still Cameras
  • MP3 Players
  • PDAs and Palmtop Devices
DataSheet
titleDownload file
MAX4970-MAX4972 Data SheetMAX4970-MAX4972.pdf
Parametrics
Part NumberChannelsVIN
(V)
VIN
(V)
Over Voltage Trip Level
(V)
Under Voltage Lockout
(V)
VGATE
(V)
tGATE (On)
(ms)
tGATE (Off)
(µs)
Package/PinsBudgetary
Price
minmaxSee Notes
MAX497012.2285.92.457135UCSP/12
WLP/12
$1.83 @1k
MAX49716.35UCSP/12
WLP/12
-
MAX49724.65UCSP/12
WLP/12
-
Quality and Environmental Data
Related Products
  • MAX4846:Overvoltage Protection Controllers with Low Standby Current
  • MAX4844:Overvoltage Protection Controllers with Low Standby Current
  • MAX4845:Overvoltage Protection Controllers with Low Standby Current
  • MAX4843:Overvoltage Protection Controllers with Low Standby Current
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX4971EBC+TNo Longer AvailableUCSP,;12 pin;3.3 mm²-40°C to +85°CLead Free
MAX4971EVKIT+No Longer AvailableEVKIT;-40°C to +85°CSee data sheet
MAX4971EWC+ActiveWLP,;12 pin;3.3 mm²-40°C to +85°CLead Free
MAX4971EWC+TActiveWLP,;12 pin;3.3 mm²-40°C to +85°CLead Free
MAX4970-MAX4972.pdf MAX4972
MAX4970-MAX4972_cn.pdf MAX4972
MAX4971.pdf MAX4971
MAX4970-MAX4972_cn.pdf MAX4971