MAX5901:-100V, SOT23/TDFN, Simple Swapper Hot-Swap Controllers

The MAX5900/MAX5901 are SOT23/TDFN hot-swap controllers that allow a circuit card to be safely hot-plugged into a live backplane without causing a glitch on the power-supply rail. These devices operate from -9V to -100V and provide the simplest hot-swap solution by eliminating all external components except an external n-channel MOSFET. The MAX5900/MAX5901 limit the inrush current to the load and provide a circuit-breaker function for overcurrent protection. During startup, the circuit-breaker function is disabled and the MAX5900/MAX5901 limit the inrush current by gradually turning on the external MOSFET. Once the external MOSFET is fully enhanced, the circuit-breaker function is enabled and the MAX5900/MAX5901 provide overcurrent protection by monitoring the voltage drop across the external MOSFET's on-resistance. The MAX5900/MAX5901 include an undervoltage lockout (UVLO) function, ON/active-low OFF control input, and a powergood status output, active-low PGOOD (MAX5900) or PGOOD (MAX5901). A built-in thermal shutdown feature is also included to protect the external MOSFET in case of overheating. The MAX5900/MAX5901 offer latched or autoretry fault management and are available with 200mV, 300mV, or 400mV circuit-breaker thresholds. Both the MAX5900 and MAX5901 are available in small SOT23 and TDFN packages, and are specified for the extended -40°C to +85°C temperature range. For specific ordering information see the Selector Guide at the end of the data sheet.

Key Features
  • Wide -9V to -100V Operation
  • Requires No External Sense Resistor
  • Drives External N-Channel MOSFET
  • Limits Inrush Current
  • Circuit-Breaker Function
  • Less than 1mA Quiescent Current
  • ON/Active-Low OFF Input Permits Load Power-Supply Control and Sequencing
  • Adjustable Undervoltage Lockout
  • Power-Good Output with 100V Rating
  • Latching or Automatic Retry Fault Management
  • Thermal Shutdown Helps Protect the External MOSFET
  • Space-Saving 6-Pin SOT23 and TDFN Packages
MAX5900, MAX5901: Typical Operating Circuit
MAX5900, MAX5901: Typical Operating Circuit
Applications/Uses
  • Base-Station Line Cards
  • Network Hubs, Switches, Routers
  • Servers
  • Telecom Line Cards
DataSheet
titleDownload file
MAX5900-MAX5901 Data SheetMAX5900-MAX5901.pdf
Parametrics
Part NumberVIN
(V)
VIN
(V)
Circuit Breaker/ Current LimitCircuit Breaker/Current Limit Threshold
(mV)
Fault Condition ControlChannelsPositive/Negative RailFeaturesPackage/PinsBudgetary
Price
minmaxSee Notes
MAX5900-9-100Circuit Breaker200 to 400Latched Off
Periodic Retry
1NegativeRequires No RSENSESOT/6
TDFN-EP/6
$2.06 @1k
MAX5901SOT/6
TDFN-EP/6
Quality and Environmental Data
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX5901AAETT+ActiveTDFN-EP,;6 pin;9.6 mm²-40°C to +85°CLead Free
MAX5901AAETT+TActiveTDFN-EP,;6 pin;9.6 mm²-40°C to +85°CLead Free
MAX5901AAETT-TNo Longer AvailableMAX5901AAETT+TTDFN-EP,;6 pin;9.6 mm²-40°C to +85°CNo
MAX5901AAEUT+ActiveSOT,;6 pin;9 mm²-40°C to +85°CLead Free
MAX5901AAEUT+TActiveSOT,;6 pin;9 mm²-40°C to +85°CLead Free
MAX5901AAEUT-TNo Longer AvailableMAX5901AAEUT+SOT,;6 pin;9 mm²-40°C to +85°CNo
MAX5901ABETT+TActiveTDFN-EP,;6 pin;9.6 mm²-40°C to +85°CLead Free
MAX5901ABETT-TNo Longer AvailableMAX5901ABETT+TTDFN-EP,;6 pin;9.6 mm²-40°C to +85°CNo
MAX5901ABEUT+ActiveSOT,;6 pin;9 mm²-40°C to +85°CLead Free
MAX5901ABEUT+TActiveSOT,;6 pin;9 mm²-40°C to +85°CLead Free
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX5901ABEUT-TNo Longer AvailableMAX5901ABEUT+SOT,;6 pin;9 mm²-40°C to +85°CNo
MAX5901ACETT+ActiveTDFN-EP,;6 pin;9.6 mm²-40°C to +85°CLead Free
MAX5901ACETT+TActiveTDFN-EP,;6 pin;9.6 mm²-40°C to +85°CLead Free
MAX5901ACETT-TNo Longer AvailableMAX5901ACETT+TTDFN-EP,;6 pin;9.6 mm²-40°C to +85°CNo
MAX5901ACEUT+ActiveSOT,;6 pin;9 mm²-40°C to +85°CLead Free
MAX5901ACEUT+TActiveSOT,;6 pin;9 mm²-40°C to +85°CLead Free
MAX5901ACEUT-TNo Longer AvailableMAX5901ACEUT+SOT,;6 pin;9 mm²-40°C to +85°CNo
MAX5901LAETT+ActiveTDFN-EP,;6 pin;9.6 mm²-40°C to +85°CLead Free
MAX5901LAETT+TActiveTDFN-EP,;6 pin;9.6 mm²-40°C to +85°CLead Free
MAX5901LAETT-TNo Longer AvailableMAX5901LAETT+TTDFN-EP,;6 pin;9.6 mm²-40°C to +85°CNo
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX5901LAEUT+TActiveSOT,;6 pin;9 mm²-40°C to +85°CLead Free
MAX5901LAEUT-TNo Longer AvailableMAX5901LAEUT+TSOT,;6 pin;9 mm²-40°C to +85°CNo
MAX5901LBETT+TNo Longer AvailableTDFN-EP,;6 pin;9.6 mm²-40°C to +85°CLead Free
MAX5901LBETT-TNo Longer AvailableTDFN-EP,;6 pin;9.6 mm²-40°C to +85°CNo
MAX5901LBEUT+TNo Longer AvailableSOT,;6 pin;9 mm²-40°C to +85°CLead Free
MAX5901LBEUT-TNo Longer AvailableSOT,;6 pin;9 mm²-40°C to +85°CNo
MAX5901LCETT+TNo Longer AvailableTDFN-EP,;6 pin;9.6 mm²-40°C to +85°CLead Free
MAX5901LCETT-TNo Longer AvailableTDFN-EP,;6 pin;9.6 mm²-40°C to +85°CNo
MAX5901LCEUT+TNo Longer AvailableSOT,;6 pin;9 mm²-40°C to +85°CLead Free
MAX5901LCEUT-TNo Longer AvailableSOT,;6 pin;9 mm²-40°C to +85°CNo
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX5901NNETT+ActiveTDFN-EP,;6 pin;9.6 mm²-40°C to +85°CLead Free
MAX5901NNETT+TActiveTDFN-EP,;6 pin;9.6 mm²-40°C to +85°CLead Free
MAX5901NNETT-TNo Longer AvailableMAX5901NNETT+TTDFN-EP,;6 pin;9.6 mm²-40°C to +85°CNo
MAX5901NNEUT+ActiveSOT,;6 pin;9 mm²-40°C to +85°CLead Free
MAX5901NNEUT+TActiveSOT,;6 pin;9 mm²-40°C to +85°CLead Free
MAX5901NNEUT-TNo Longer AvailableMAX5901NNEUT+SOT,;6 pin;9 mm²-40°C to +85°CNo
MAX5900-MAX5901.pdf MAX5901
Hot-Swap Controllers Improve Power-Supply Sequencing MAX5903
Advantages of IC-Based Hot-Swap Circuit Protection MAX5943
-48V Hot Swap Solution For Telecom Line Cards Assures Immunity To Input Voltage Transients MAX5901
MAX5901.pdf MAX5901
MAX5900-MAX5901.pdf MAX5901