• 简体中文
• English

MAX8586：Single 1.2A USB Switch in 3mm x 3mm TDFN

The MAX8586 single current-limited switch controls up to 1.2A to power USB applications and has multiple protection features including thermal shutdown, internal current limiting, and reverse current protection. The thermal shutdown limits junction temperature during a prolonged short or overload condition. The internal current-limiting circuitry protects the input supply against overload and is programmable using an external resistor. The MAX8586 meets all IEC specifications for USB ports. The IC latches off when the output experiences a short circuit for more than 20ms, saving system power. Auto-restart tests the shorted output with a 25mA current to determine if the short still exists. Once the short is removed, the MAX8586 automatically restarts the output. An open-drain fault signal notifies the system that the internal current limit has been reached. A 20ms fault-blanking feature allows the circuit to ignore momentary faults such as those caused when hot-swapping into a capacitive load. An ENRESET input is available to disable the auto-restart function. The MAX8586 features a SEL input that programs ON to be either active high or active low. The IC is supplied in a space-saving, 8-pin, 3mm x 3mm TDFN package.

Key Features Reverse Current Protection Programmable Current Limit Up to 1.2A Accurate Current Limit Selectable Auto-Restart when Fault Is Removed Thermal-Overload Protection Selectable Active-High/Low ON Input Built-In 20ms Fault Blanking Compliant with All USB Specifications 2.75V to 5.5V Input Supply Range Active-Low FAULT Indicator Output 15kV ESD Protection (with Caps) Tiny 8-Pin 3mm x 3mm TDFN Package

MAX8586: Typical Operating Circuit Applications/Uses Desktop/Notebook Computers Docking Stations PDAs and Palmtop Computers USB Ports/Hubs

DataSheet

Parametrics

Design kits & evaluation modules

• MAX8586EVKIT

Quality and Environmental Data

• MAX8586.pdf

Related Products

• MAX1558：Dual, 3mm x 3mm, 1.2A/Programmable-Current USB Switches with Autoreset
• MAX1558H：Dual, 3mm x 3mm, 1.2A/Programmable-Current USB Switches with Autoreset
• MAX1562：Programmable, 4A, USB, Current-Limited Switches with Autoreset and Fault Blanking
• MAX1946：Single USB Switch with Autoreset and Fault Blanking in Tiny TDFN
• MAX1823：Dual USB Switch with Fault Blanking and Autoreset

Ordering Information