MAX8893C:µPMICs for Multimedia Application Processors in a 3.0mm x 2.5mm WLP

Highly Integrated µPMICs for Multimedia Processor ICs with a High-Speed USB Switch

The MAX8893A/MAX8893B/MAX8893C power-management integrated circuits (PMICs) are designed for a variety of portable devices including cellular handsets. The PMICs include a high-efficiency step-down DC-DC converter, five low-dropout linear regulators (LDOs) with programmable output voltages, individual power-on/off control inputs, a load switch, and a USB high-speed switch. These devices maintain high efficiency with a low no-load supply current, and the small 3.0mm x 2.5mm WLP package makes them ideal for portable devices. The step-down DC-DC converter utilizes a proprietary 4MHz hysteretic PWM control scheme that allows for ultra-small external components. Internal synchronous rectification improves efficiency and eliminates the external Schottky diode that is required in conventional step-down converters. Its output voltage is programmable by the I²C serial interface and output current is guaranteed up to 500mA. LDO1, LDO4, and LDO5 offer low 45µVRMS output noise and low dropout of only 100mV at 100mA. They deliver up to 300mA, 150mA, and 200mA continuous output currents, respectively. LDO2 and LDO3 each deliver 300mA continuous output current with very low ground current. All LDO output voltages are programmable by the I²C serial interface. Three standard versions of the PMIC are available with different LDO default startup voltages (see Table 1 in the full data sheet). The MAX8893A/MAX8893B/MAX8893C are available in a 3.0mm x 2.5mm, 30-bump WLP package.

Key Features
  • High-Efficiency Step-Down Converter
    • Guaranteed 500mA Output Current
    • Up to 4MHz Switching Frequency
    • Programmable Output Voltage from 0.8V to 2.4V
    • Dynamic Voltage Scaling with Programmable Ramp Rate
  • Three Low-Noise LDOs with Programmable Output Voltages
  • Two Low Supply Current LDOs with Programmable Output Voltages
  • Low On-Resistance Load Switch
  • USB High-Speed Switch with ±15kV ESD
  • Individual Enable Control for All Regulators and Switches
  • I²C Serial Interface
  • Overcurrent and Thermal Protection for All LDOs
  • 3.0mm x 2.5mm x 0.64mm, 30-Bump WLP
MAX8893A, MAX8893B, MAX8893C: Typical Operating Circuit
MAX8893A, MAX8893B, MAX8893C: Typical Operating Circuit
  • Cellular Handsets
  • Smartphones and PDAs
titleDownload file
MAX8893A-MAX8893C Data SheetMAX8893A-MAX8893C.pdf
Part NumberPrimary TopologyMonitor/Control FeaturesDC-DC/Power FeaturesInterface TypeVIN
Oper. Freq.
MAX8893AStep-DownDynamic V Adj.
Serial Interface
Current Limit
Fixed Freq./PWM
Internal Switch
Soft Start
Sync. Rectifier
Design kits & evaluation modules
Quality and Environmental Data
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX8893CEWV+ActiveWLP,;30 pin;8.1 mm²-40°C to +85°CLead Free
MAX8893CEWV+TActiveWLP,;30 pin;8.1 mm²-40°C to +85°CLead Free
MAX8893A-MAX8893C.pdf MAX8893C
MAX8893C.pdf MAX8893C
典型工作电路 MAX8893C