• 简体中文
• English

MAX9994：SiGe High-Linearity, 1400MHz to 2200MHz Downconversion Mixer with LO Buffer/Switch

Lowest Noise, Highest Linearity, 1400MHz to 2200MHz SiGe Downconversion Mixer for 2.5G, 3G, and 4G Base Stations

The MAX9994 high-linearity downconversion mixer provides 8.3dB gain, +26.2dBm IIP3, and 9.7dB NF for 1400MHz to 2200MHz UMTS/WCDMA, DCS, and PCS base-station receiver applications. With a wide LO range of 1400MHz to 2000MHz, the MAX9994 can be used in either high-side or low-side LO injection architectures, depending on the RF band of interest. Higher LO applications are supported by the MAX9996, which is pin-pin and functionally compatible with the MAX9994. In addition to offering excellent linearity and noise performance, the MAX9994 also yields a high level of component integration. This device includes a double-balanced passive mixer core, an IF amplifier, a dual-input LO selectable switch, and an LO buffer. On-chip baluns are also integrated to allow for single-ended RF and LO inputs. The MAX9994 requires a nominal LO drive of 0dBm, and supply current is guaranteed to be below 235mA. The MAX9994/MAX9996 are pin compatible with the MAX9984/MAX9986 815MHz to 995MHz mixers, making this entire family of downconverters ideal for applications where a common PC board layout is used for both frequency bands. The MAX9994 is also functionally compatible with the MAX9993. The MAX9994 is available in a compact, 20-pin, thin QFN package (5mm x 5mm) with an exposed pad. Electrical performance is guaranteed over the extended -40°C to +85°C temperature range.

Key Features 1400MHz to 2200MHz RF Frequency Range 1400MHz to 2000MHz LO Frequency Range (MAX9994) 1900MHz to 2400MHz LO Frequency Range (MAX9996) 40MHz to 350MHz IF Frequency Range 8.3dB Conversion Gain +26.2dBm Input IP3 +12.6dBm Input 1dB Compression Point 9.7dB Noise Figure 67dBc 2RF - 2LO Spurious Rejection at PRF = -10dBm Integrated LO Buffer Integrated RF and LO Baluns for Single-Ended Inputs Low -3dBm to +3dBm LO Drive Built-In SPDT LO Switch with 45dB LO1 to LO2 Isolation and 50ns Switching Time Pin Compatible with the MAX9984/MAX9986 815MHz to 995MHz Mixers Functionally Compatible with the MAX9993 External Current-Setting Resistors Provide Option for Operating Mixer in Reduced Power/Reduced Performance Mode

MAX9994: Typical Application Circuit Applications/Uses cdmaOne™ and cdma2000® Base Stations DCS1800/PCS1900 EDGE Base Stations Digital and Spread-Spectrum Communication Systems Fixed Broadband Wireless Access Microwave Links Military Systems PHS/PAS Base Stations Predistortion Receivers Private Mobile Radios (PMRs) TD-SCDMA/TD-LTE Base Stations UMTS/LTE Base Stations Wireless Local Loop (WLL)

DataSheet

Parametrics

Design kits & evaluation modules

• MAX9994EVKIT

Quality and Environmental Data

• MAX9994.pdf

Related Products

• MAX2039：High-Linearity, 1700MHz to 2200MHz Upconversion/Downconversion Mixer with LO Buffer/Switch
• MAX9995：Dual, SiGe, High-Linearity, 1700MHz to 2700MHz Downconversion Mixer with LO Buffer/Switch
• MAX9993：High-Linearity 1700MHz to 2200MHz Down-Conversion Mixer with LO Buffer/Switch
• MAX9981：825MHz to 915MHz, Dual SiGe High-Linearity Active Mixer
• MAX9989：+14dBm to +20dBm LO Buffers with ±1dB Variation
• MAX9990：+14dBm to +20dBm LO Buffers with ±1dB Variation
• MAX9982：825MHz to 915MHz, SiGe High-Linearity Active Mixer
• MAX9987：+14dBm to +20dBm LO Buffers/Splitters with ±1dB Variation
• MAX9988：+14dBm to +20dBm LO Buffers/Splitters with ±1dB Variation

Ordering Information